|
Re: [Non-DoD Source] Re: [RealSTMFC] Elgin Boxcar Green/Orange paint when started? Decals Available???
This may help. From the prototype photo of 61216 posted earlier, I did this model a few years ago. Intermountain 40' undec p/n 41099 which comes with 6' door, 10' H, 12 panel sides, r/3/4 ends, 8 rung
This may help. From the prototype photo of 61216 posted earlier, I did this model a few years ago. Intermountain 40' undec p/n 41099 which comes with 6' door, 10' H, 12 panel sides, r/3/4 ends, 8 rung
|
By
pennsylvania1954
·
#165484
·
|
|
Re: New Walthers freight cars
Bill Welch wrote:
"An industry insider told me Walthers is hearing all sort of grief for this release. Too bad when they purchased the Life-Like Proto 2000 line they did not hire the brain power
Bill Welch wrote:
"An industry insider told me Walthers is hearing all sort of grief for this release. Too bad when they purchased the Life-Like Proto 2000 line they did not hire the brain power
|
By
Benjamin Hom
·
#165483
·
|
|
Need Ride from St Louis airport
I will be flying into the St. Louis airport on Thursday, July 25h, on SW airlines. My flight arrives at 12:50 p.m. Can anyone pick me up and take me the Super 8 Hotel on Gateway Dr. in Collinsville
I will be flying into the St. Louis airport on Thursday, July 25h, on SW airlines. My flight arrives at 12:50 p.m. Can anyone pick me up and take me the Super 8 Hotel on Gateway Dr. in Collinsville
|
By
Jared Harper
·
#165482
·
|
|
Re: New Walthers freight cars
An industry insider told me Walthers is hearing all sort of grief for this release. Too bad when they purchased the Life-Like Proto 2000 line they did not hire the brain power behind the line. No
An industry insider told me Walthers is hearing all sort of grief for this release. Too bad when they purchased the Life-Like Proto 2000 line they did not hire the brain power behind the line. No
|
By
Bill Welch
·
#165481
·
|
|
10 Days Away: 2019 St. Louis RPM
Hi Friends,
We are about 10 days away from the 2019 St. Louis RPM in Collinsville, Illinois! Friday July 26 and Saturday July 27.
Tell your friends. Forward this along to your favorite
Hi Friends,
We are about 10 days away from the 2019 St. Louis RPM in Collinsville, Illinois! Friday July 26 and Saturday July 27.
Tell your friends. Forward this along to your favorite
|
By
Daniel Kohlberg
·
#165480
·
|
|
Re: [Non-DoD Source] Re: [RealSTMFC] Elgin Boxcar Green/Orange paint when started? Decals Available???
Bill;
Mine was not the original question, but I was secondarily wondering if anyone had done the later Billboard schemes, and Hubert Mask has.
Wow, you did a LOT of work for that car! Kudos!
Elden
Bill;
Mine was not the original question, but I was secondarily wondering if anyone had done the later Billboard schemes, and Hubert Mask has.
Wow, you did a LOT of work for that car! Kudos!
Elden
|
By
Gatwood, Elden J SAD
·
#165479
·
|
|
Re: Poultry car models
That was why I went searching for it at the NTS. It was not on display.
Eric Hansmann
Murfreesboro, TN
That was why I went searching for it at the NTS. It was not on display.
Eric Hansmann
Murfreesboro, TN
|
By
Eric Hansmann
·
#165478
·
|
|
Re: [Non-DoD Source] Re: [RealSTMFC] Elgin Boxcar Green/Orange paint when started? Decals Available???
Thanks for sharing those, Tim!
I have long hoped for the EJ&E story on their freight car fleet. Anyone know if it exists?
The steel roads are of endless fascination in terms of their individual
Thanks for sharing those, Tim!
I have long hoped for the EJ&E story on their freight car fleet. Anyone know if it exists?
The steel roads are of endless fascination in terms of their individual
|
By
Gatwood, Elden J SAD
·
#165476
·
|
|
Re: New Walthers freight cars
No doubts about the engine to pull it. It has to be CSX.
Jack Wyatt
No doubts about the engine to pull it. It has to be CSX.
Jack Wyatt
|
By
C J Wyatt
·
#165475
·
|
|
Re: New Walthers freight cars
I think the operative phrase was one Richard Hendrickson used often: "Train set Bozos" will buy them. No doubt someday there will be a YouTube video with someone having an entire unit train of
I think the operative phrase was one Richard Hendrickson used often: "Train set Bozos" will buy them. No doubt someday there will be a YouTube video with someone having an entire unit train of
|
By
tyesac@aol.com <tyesac@...>
·
#165474
·
|
|
New Walthers freight cars
Aaack! Where did this crap come from?
Tony Thompson
Aaack! Where did this crap come from?
Tony Thompson
|
By
Tony Thompson
·
#165473
·
|
|
Re: Poultry car models
The MR “newsletter” had a photo.
Tony Thompson
The MR “newsletter” had a photo.
Tony Thompson
|
By
Tony Thompson
·
#165472
·
|
|
Re: Poultry car models
Thanks Eric. I was wondering. I saw Kalmbach had the car listed among new items, but no photo.
Doug Harding
www.iowacentralrr.org
Thanks Eric. I was wondering. I saw Kalmbach had the car listed among new items, but no photo.
Doug Harding
www.iowacentralrr.org
|
By
Douglas Harding
·
#165471
·
|
|
Re: Poultry car models
I looked for these at the National Train Show but Bachmann did not have them displayed.
Eric Hansmann
Murfreesboro, TN
I looked for these at the National Train Show but Bachmann did not have them displayed.
Eric Hansmann
Murfreesboro, TN
|
By
Eric Hansmann
·
#165470
·
|
|
Re: RDG 70000 series 4-bay hoppers
David,
Thank you very much for all the information on Reading hoppers. I will keep the attached documents on file for the HTn build and reference for possible upgrades to the F&C and Stewart kits I
David,
Thank you very much for all the information on Reading hoppers. I will keep the attached documents on file for the HTn build and reference for possible upgrades to the F&C and Stewart kits I
|
By
James E Kubanick
·
#165469
·
|
|
Re: RDG 70000 series 4-bay hoppers
Jack and Bruce,
Thank you for your kind responses.
I did intend to add the car number to my original post. It is 70056, so this appears to be an HTn. I'm leaning toward putting a horizontal brake
Jack and Bruce,
Thank you for your kind responses.
I did intend to add the car number to my original post. It is 70056, so this appears to be an HTn. I'm leaning toward putting a horizontal brake
|
By
James E Kubanick
·
#165468
·
|
|
Re: Looking for Lehigh Valley Freight Car Diagrams
Hi Eric,
Thanks much for sharing your diagram books. I've been looking to model some hopper cars since K4 Supply Company now sells Lehigh Valley HO scale decals. Having this additional info is a big
Hi Eric,
Thanks much for sharing your diagram books. I've been looking to model some hopper cars since K4 Supply Company now sells Lehigh Valley HO scale decals. Having this additional info is a big
|
By
Steve Sejda
·
#165467
·
|
|
Re: MODEL OR PROTOTYPE
Dennis
Warren Weiss recently invested in a Form Labs Form2 SLA printer and is making castings for his scale. I suspect he will go back and upgrade some of his older cars.
He built a Brill gas
Dennis
Warren Weiss recently invested in a Form Labs Form2 SLA printer and is making castings for his scale. I suspect he will go back and upgrade some of his older cars.
He built a Brill gas
|
By
Gene Deimling
·
#165466
·
|
|
Re: MODEL OR PROTOTYPE
Surprising the builder would miss that... although I suspect he'e investigating having custom investment castings made.
Dennis Storzek
Surprising the builder would miss that... although I suspect he'e investigating having custom investment castings made.
Dennis Storzek
|
By
Dennis Storzek
·
#165465
·
|
|
Re: ASF Catalog
And absolutely NONE of those parts are interchangeable between different brands of couplers. A really good illustration of the need for standardization, answered by the adoption of the ARA Type D
And absolutely NONE of those parts are interchangeable between different brands of couplers. A really good illustration of the need for standardization, answered by the adoption of the ARA Type D
|
By
Dennis Storzek
·
#165464
·
|