Date   

Re: Precision Scale parts

gary laakso
 

Which part number did you order? I have their catalogues and have a list of parts to order and the project today is to find which one to order! TIA

gary laakso
south of Mike Brock where its 62 degrees n sunny
vasa0vasa@earthlink.net

----- Original Message -----
From: Denny Anspach
To: STMFC@yahoogroups.com
Sent: 1/4/2010 12:39:30 PM
Subject: [STMFC] Re: Precision Scale parts



Very recently, PSC filled my phone order for tank car stanchions in a
matter of days (they had them packaged and in stock). My more usual
experience over the year is that one has to wait some weeks while the
parts are cast to order.

They did comment to me that there had been considerable interest in
the stanchions recently.

They ARE pretty nice!

Denny

Denny S. Anspach MD
Sacramento




[Non-text portions of this message have been removed]


Re: Precision Scale Angle Cock Bracket

golden1014
 

Tony, Schuyler and All,

Thanks for the advice. I'll give 'em a call today. Have fun at Cocoa!

John Golden
Bloomington, IN

--- In STMFC@yahoogroups.com, Anthony Thompson <thompson@...> wrote:

Schuyler Larrabee wrote:
Many years ago, I was looking desperately for some PSC GP handrail
brackets. I ordered them from Walthers and kept getting an answer
"Out of stock at the manufacturer." This went on for months.
Finally, I realized that PSC was essentially up the road a ways - I
lived in San Francisco then, and at that time PSC was located in
Woodland CA, just up Interstate 80 a few miles. So, I called
information and got their phone number, called them up and asked
when they would be making more of the particular part I wanted. I
was greeted with laughter, not mean laughter, but laughter
nonetheless. When he regained his composure, he asked "How many
pounds of them would you like?"
That little story is to suggest that you should call PSC
directly. I suspect you could get several pounds of the "Brass
Angle Cock Brackets" if you do so.
Exactly. Walthers is like a lot of hobby shops. When they say "out
of stock," it may easily just mean "not convenient for us to order
right now," as Signature Press has learned also with MANY hobby shops
regarding our books.
I recently arranged a bulk order of PSC parts with little trouble
and a nice discount. DO call them.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@...
Publishers of books on railroad history


Re: ATSF raised--roof BX-12

railwayman <stevelucas3@...>
 

Richard--

Thanks! I'll get a pair of the TMW 202's for this car, and number/detail it as a Bx-11. I'll have to read the Westerfield instructions a bit more closely.

Steve Lucas.

--- In STMFC@yahoogroups.com, Richard Hendrickson <rhendrickson@...> wrote:

On Jan 3, 2010, at 3:09 PM, railwayman wrote:

Are the TMW 201 "50 ton Dalman 2-level trucks" suitable for this
car as modelled by the Westerfield kit?
Steve, the Santa Fe Dalman trucks had Barber Lateral Motion devices,
so what you need are the TMW #202 trucks. Actually, the Bx-11s had
Dalman 2-level trucks, for which the TMW HO scale trucks are dead
on. The Bx-12s, built a year later, had Dalman 1-level trucks, which
were made only briefly ca. 1930-'32, and have never been modeled in
HO. However, the TMW #202s are quite close - as close as you're
going to get.

Richard Hendrickson





Re: Precision Scale parts

Denny Anspach <danspach@...>
 

Very recently, PSC filled my phone order for tank car stanchions in a matter of days (they had them packaged and in stock). My more usual experience over the year is that one has to wait some weeks while the parts are cast to order.

They did comment to me that there had been considerable interest in the stanchions recently.


They ARE pretty nice!

Denny

Denny S. Anspach MD
Sacramento


Re: freight car wheel help

Richard Hendrickson
 

On Jan 4, 2010, at 2:20 AM, Tim O'Connor wrote:

Cast iron wheels were prohibited on NEW/REBUILT cars after 1958,
but they were not prohibited from interchange until 1970.
Tim is correct. However, it remains true that a car delivered new
with 1 W wrought steel wheels would hardly ever have had them
replaced with cast wheels in later years.

Richard Hendrickson


Re: ATSF raised--roof BX-12

Raymond Young
 

Jerry,

Love that car!  See attached picture.

Virgil TE

--- On Mon, 1/4/10, asychis@aol.com <asychis@aol.com> wrote:

From: asychis@aol.com <asychis@aol.com>
Subject: [STMFC] Re: ATSF raised--roof BX-12
To: STMFC@yahoogroups.com
Date: Monday, January 4, 2010, 8:28 AM







 









Curious, I take it a lot of us have seen Andy Sperandeo's nice article in

the latest MR on building a resin kit, with the model being an AT&SF

BX11/BX12?



Jerry Michels



[Non-text portions of this message have been removed]






















[Non-text portions of this message have been removed]


Re: USRA design Twin hopper rebuilt into Covered hopper:

water.kresse@...
 

Thank you,



Al Kresse

----- Original Message -----
From: "soolinehistory" <destorzek@mchsi.com>
To: STMFC@yahoogroups.com
Sent: Sunday, January 3, 2010 12:23:15 PM GMT -05:00 US/Canada Eastern
Subject: [STMFC] USRA design Twin hopper rebuilt into Covered hopper:



--- In STMFC@yahoogroups.com, "Dave & Donna" <ironhoss1994@...> wrote:

Are there published plans for a AAR twin hooper?   I would like to build one in 1.5 in scale.

Thanks for all replies so far.

Dave J.
This is getting out of hand. The car in the photos is a USRA design (Although built after the USRA was disbanded and the railroads returned to their owners). Drawings for the USRA car can be found in the Car Builder's Cyclopedias from WWI until 1940, and have been redrawn and published in MR ages ago, and Mainline Modeler more recently.

The various AAR standard hoppers were all offset side designs. Drawings can be found in the same sources.

Dennis



[Non-text portions of this message have been removed]


Re: Grand Trunk flat series number

frograbbit602
 

Ian,

Thank You for the additional CN numbering information and car life. Information I did not know and I am pleased to have. Thanks again!
Lester Breuer
Minneapolis, MN

--- In STMFC@yahoogroups.com, Ian Cranstone <lamontc@...> wrote:

I will add to Brian Leppert's reply of the series being GT 64300-65299, the additional note that these cars were renumbered to CN 659000-659999 during the 1923-1932 period, with the last surviving car being removed in 1981 (GT 64300 was assigned CN 659000) -- there were still 650 cars in this series as of the 1960 cutoff date of this list.

As a group, these cars were constructed by National Steel Car from 4-6/1921 (GT 64300-64699) and 9-11/1921 (GT 64700-65299). I'm not sure of the reason for no cars having been built during the summer months -- it's possible that there was a summer shutdown for vacation (I recall my grandfather noting this as a standard practice at the CPR shops in Winnipeg where he worked for many years -- everybody simply got the same couple of weeks as the entire shop shut down), or perhaps there was a labour issue. It's also possible that there were two separate lots of cars involved (especially given the neat 400/600 car split), although I only know of one lot number.


Ian Cranstone
Osgoode, Ontario, Canada
lamontc@...
freightcars.nakina.net

On 2010-01-02, at 10:33 AM, Lester Breuer wrote:
Grand Trunk flat number 64300 photo on p. 172, Fig. 135 in Train Shed Cyc. No. 62 from the 1925 Car Builders or photo in 1928 Car Builders Cyc. p. 190, Fig. 143. I do not have an ORER to get number series. Can someone tell me the number series this car was in?



RES: Precision Scale Angle Cock Bracket

Marcelo Lordeiro <mrcustom@...>
 

Just e-mail them or call.



Precision Scale Company, Inc.
2383 Meridian Road
Victor, MT 59875
Phone: (406) 642-3901
Fax: (406) 642-3904
<mailto:psc@ixi.net> psc@ixi.net



Marcelo Lordeiro

www.mrcustom.com.br

trens@mrcustom.com.br

Tel.: +55 21 2273-2758



_____

De: STMFC@yahoogroups.com [mailto:STMFC@yahoogroups.com] Em nome de John
Golden
Enviada em: segunda-feira, 4 de janeiro de 2010 00:25
Para: stmfc@yahoogroups.com
Assunto: [STMFC] Precision Scale Angle Cock Bracket





Gentlemen,

Does anyone know where I could find the Precision Scale HO "Brass Angle Cock
Bracket". I'd like to order some and can't find anyone that has them. They
are item #39156. Thanks--my steam-era freight cars need 'em.

John
Golden1014@yahoo. <mailto:Golden1014%40yahoo.com> com

John Golden
Bloomington, IN


Re: freight car wheel help

Tim O'Connor
 

Richard

Cast iron wheels were prohibited on NEW/REBUILT cars after 1958,
but they were not prohibited from interchange until 1970.

Tim O'Connor


Yes, and yes. After World War II, many cars still had cast iron

wheels, which weren't outlawed by the AAR until 1958, but it would
have been very rare for a car that was delivered with one wear
wrought steel wheels to have them replaced with anything else.

Richard Hendrickson


Re: ATSF raised--roof BX-12

asychis@...
 

Curious, I take it a lot of us have seen Andy Sperandeo's nice article in
the latest MR on building a resin kit, with the model being an AT&SF
BX11/BX12?

Jerry Michels


Re: AAR Twin hopper rebuilt into Covered hopper:

Donald Ford <ford.donald77@...>
 

Tim my records show they were bought second had from Wilcox Company in Chicago IL in 1930.  Nice photo staff hand brake and ck out the location of the AB brake air tank.
Don Ford
Kanab UT




________________________________
From: Tim O'Connor <timboconnor@comcast.net>
To: STMFC@yahoogroups.com
Sent: Sun, January 3, 2010 3:35:59 AM
Subject: RE: [STMFC] AAR Twin hopper rebuilt into Covered hopper:

 

Matt, I don't know anything about them except the builder (Pressed
Steel) and built date (1922) shown in the NP Color Guide. They are
listed in the 1940 ORER as a complete series (49 cars) 70000-70048.
They were only 18 years old in 1940 I don't know of anyone who got
rid of USRA clones so soon.

Tim O'Connor

Thanks for your response. My question should have been more specific. Were
the NP 70000 series hopper cars purchased new or used and if used from what
source.

One of these cars was still around a few years ago on MRL in Missoula.

Matt Herson

From: STMFC@yahoogroups. com [mailto:STMFC@yahoogroups. com] On Behalf Of Tim
O'Connor
Sent: Saturday, January 02, 2010 8:50 PM
To: STMFC@yahoogroups. com
Subject: RE: [STMFC] AAR Twin hopper rebuilt into Covered hopper:

Matt the captions in the NP Color Guide say these were rebuilt from
USRA clones 70000-70048 in 1957. And one of the photos is from your
collection!

Tim O'Connor

At 1/2/2010 07:23 PM Saturday, you wrote:
The car comes from the NP 207400-207427 series used in company sand service
as lettered on the car. They were originally NP 70000-70048 series hoppers
built in 1922 and rebuilt for sand service in 1957 and 1959. This from NP
diagram sheets posted at

www.nprha. org

Another question regarding these cars: Were they purchased new or used by
the NP?

Thanks for any replys,

Matt Herson






[Non-text portions of this message have been removed]


Haute Couture for Cocoa Beach

sctry
 

In order to enhance our Steam Era Freight Car modeling experience at the
forthcoming ProtoRails 2010 (aka: Cocoa Beach), the following thread from
the recently defunct "Shirt Club Discussion Group" is passed along: "..the
membership selection committee chairman while relaxing with a refreshing
Leinenkugels has declared that ProtoRails 2010 to be a RED SHIRT Thursday,
BLACK SHIRT Friday and SEA MIST GREEN SHIRT Saturday." All inductees and
members in good standing of the ____?____ (a.k.a. Hawaiian Shirt Club,
Chicago Shirt Mafia, Polish National Touring Bowling Team, Those Guys in the
Crazy Shirts, I want one too) are encouraged to proudly wear their colors
while participating in the Cocoa Beach events. In the event of
inappropriate weather; long sleeve, insulated versions of the official
colors shall be in effect.

Weather or not, here we come!



J. Greedy

Exofficio Recording Secretary


Re: New file uploaded to STMFC

Tim O'Connor
 

Gene

Nice! And a vertical brake staff too!

Tim O'Connor

File : /NP USRA twin LoganMT66.jpg
Uploaded by : losgatos48 <losgatos48@comcast.net>
Description : NP USRA clone still in coal service when this 1966 photo was taken.

You can access this file at the URL:
http://groups.yahoo.com/group/STMFC/files/NP%20USRA%20twin%20LoganMT66.jpg

Regards,

losgatos48 <losgatos48@comcast.net>


Re: Precision Scale Angle Cock Bracket

Anthony Thompson <thompson@...>
 

Schuyler Larrabee wrote:
Many years ago, I was looking desperately for some PSC GP handrail brackets. I ordered them from Walthers and kept getting an answer "Out of stock at the manufacturer." This went on for months. Finally, I realized that PSC was essentially up the road a ways - I lived in San Francisco then, and at that time PSC was located in Woodland CA, just up Interstate 80 a few miles. So, I called information and got their phone number, called them up and asked when they would be making more of the particular part I wanted. I was greeted with laughter, not mean laughter, but laughter nonetheless. When he regained his composure, he asked "How many pounds of them would you like?"
That little story is to suggest that you should call PSC directly. I suspect you could get several pounds of the "Brass Angle Cock Brackets" if you do so.
Exactly. Walthers is like a lot of hobby shops. When they say "out of stock," it may easily just mean "not convenient for us to order right now," as Signature Press has learned also with MANY hobby shops regarding our books.
I recently arranged a bulk order of PSC parts with little trouble and a nice discount. DO call them.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history


Re: Precision Scale Angle Cock Bracket

Schuyler Larrabee
 

Many years ago, I was looking desperately for some PSC GP handrail brackets. I ordered them from
Walthers and kept getting an answer "Out of stock at the manufacturer." This went on for months.
Finally, I realized that PSC was essentially up the road a ways - I lived in San Francisco then, and
at that time PSC was located in Woodland CA, just up Interstate 80 a few miles. So, I called
information and got their phone number, called them up and asked when they would be making more of
the particular part I wanted. I was greeted with laughter, not mean laughter, but laughter
nonetheless. When he regained his composure, he asked "How many pounds of them would you like?"

That little story is to suggest that you should call PSC directly. I suspect you could get several
pounds of the "Brass Angle Cock Brackets" if you do so.

SGL



Gentlemen,

Does anyone know where I could find the Precision Scale HO "Brass Angle Cock Bracket". I'd like
to order some and
can't find anyone that has them. They are item #39156. Thanks--my steam-era freight cars need
'em.

John
Golden1014@yahoo.com <mailto:Golden1014%40yahoo.com>

John Golden
Bloomington, IN




E-mail message checked by Spyware Doctor (7.0.0.508)
Database version: 6.14040
http://www.pctools.com/en/spyware-doctor-antivirus/


Re: ACL Images - Tampa-Hillsborough County Public Library

Scott Pitzer
 

If the first one is available in a large (clear) format, it would seem to qualify for several of Shorpy.com's gallery categories including "Cars and Trucks," "Railroads," and "Factories" (and maybe "Pretty Girls" too.)
Scott Pitzer

--- In STMFC@yahoogroups.com, "Bob C" <thecitrusbelt@...> wrote:

I found these photos on the Tampa-Hillsborough County Public Library's Burgert Brothers Photographic Archives.

Bob Chaparro
Hemet, CA
===========================
Here is an ACL single sheathed box car in front of the Celo Company of America warehouse. The image commemorates the first freight car shipment of Celo soft drink. Tampa, FL. May 7, 1930.

http://digital.hcplc.org/burgert/archive06/5510.jpg

Additional ACL cars.

http://digital.hcplc.org/burgert/archive09/8591.jpg

Can anyone identify the car on the left in the second photo?


Re: freight car wheel help

Richard Hendrickson
 

On Jan 3, 2010, at 5:44 PM, Brian J Carlson wrote:

If a boxcar was built in April of 1944 with 1 wear wrought steel
wheels
would they likely still be on the car in 1957. I know cast wheels were
banned at some point in the 50's but I don't know much else about the
freight car wheel technology in that time frame. Were 1 wear
wrought steel
wheels state of the art then?
Yes, and yes. After World War II, many cars still had cast iron
wheels, which weren't outlawed by the AAR until 1958, but it would
have been very rare for a car that was delivered with one wear
wrought steel wheels to have them replaced with anything else.

Richard Hendrickson


Precision Scale Angle Cock Bracket

golden1014
 

Gentlemen,
 
Does anyone know where I could find the Precision Scale HO "Brass Angle Cock Bracket".  I'd like to order some and can't find anyone that has them.  They are item #39156.  Thanks--my steam-era freight cars need 'em.
 
John
Golden1014@yahoo.com

John Golden
Bloomington, IN

[Non-text portions of this message have been removed]


Re: freight car wheel help

Anthony Thompson <thompson@...>
 

Brian Carlson wrote:
If a boxcar was built in April of 1944 with 1 wear wrought steel wheels would they likely still be on the car in 1957. I know cast wheels were banned at some point in the 50's but I don't know much else about the freight car wheel technology in that time frame. Were 1 wear wrought steel wheels state of the art then?
I don't know the answer for sure, Brian, but I have the impression that multiple-wear wheels were experimented with by many roads before and right after WW II, and pretty universally determined to be not worth the weight and cost (including re-profiling cost). Single-wear wheels became pretty standard on most railroads by, say, 1950. At least that's what I think happened. If someone on the list has specifics, please tell us.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history

93401 - 93420 of 181087