Date   

Re: Adjusting the gondola fleet

Clark Propst
 

Not being familiar with your area I can only question are your trains all shorts or are there some through cars? Shorts would be dictated by your customers. Through car would be coming or going from other parts of the system or being interchanged with another RR.
Train lists and/or photos of trains in the area are vital.
I've attached a photo I dug up while putting together my CCB talk. The engine is being turned on a wye at the end of the line. I admired the NYC gon and also wondered what it was doing there. I think I mentioned how I'd like one. Well a friend told me they were about to start on a Sunshine gondola kit they'd bought from a collection at Caboose Stop Hobbies sometime prior. I asked about it and sure enough it was the car in the photo! I bought it and built it. I also have a Sunshine PRR gon. I use them to haul pipe or culverts for the RR or for a city, county  yard along the line. Other than those two the others are local roads that would bring in coal from mines in Ill or further east.
CW Propst


Photo: B&O M15K

 

To follow in Bob's footsteps,

Photo: B&O M15K

Another Doug Lilly photo:

https://www.flickr.com/photos/149706553@N05/49315460871/in/album-72157689269937726/

Caption:   I'll let each of you read it for yourselves.

This car looks to have the replacement frame.
This car also has the 3 section end ( with a splice plate on top section ). I've seen or have photos of these cars with
3 section, 2 section and single section ends, 2 or 1 grab above the ladder, and split air tank or regular AB
brake components.

Has anyone ever done a thorough article of the variations on these interesting cars? There seems to have been
quite a bit of evolution as these cars were constructed.

The Mount Clare Shops / Funaro and the Chicagoland Fox Valley kitbash M15K's both have the single section ends.

Thank you,
Dan Smith

 


Re: C&O 40' 1930 Automobile Boxcar

Donald B. Valentine <riverman_vt@...>
 

Chuck Cover wrote: "I bought the kit was because they are a bit shorter in height than most automobile boxcars and give the consist and different look.  We don’t want all 10’4” 40’ auto boxcars do we?"

   That's the the same reasoning I use to buy most house cars. The different hsights, different styles of roof and different car
construction all contribute to the variety of freight cars we used to see in freight trains so I buy as long as the car is one for a 
road whose cars were known to frequent my area. Today the ony thing that seems to change is the pattern of graffitti on the 
cars. When I see that I wish each car had a 50 cal. turret on top of it with a gunner having a shoot to kill order for anyone seen approaching the train with a spray can.  Damned sick of the irresponsibe nonsense with spray cans to the point where I'd like
to see the Federally outlawed.

Just my point of view, Don Valentine


Re: Photo: B&O Tank Car X10

Bruce Smith
 

That's not the only clue 😉  

As for the design, it's prewar all right, pre WWII, and pre WWI!  The single rows of rivets generally data a tank car to 1917 or earlier. They are correct about the car being a UTLX built car, it is a UTLX type X.

Regards,
Bruce Smith
Auburn, AL


From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Charles Peck <lnnrr152@...>
Sent: Tuesday, March 17, 2020 1:20 PM
To: main@realstmfc.groups.io <main@realstmfc.groups.io>
Subject: Re: [RealSTMFC] Photo: B&O Tank Car X10
 
The car appears to me to be missing a knuckle on the left end.  This suggests  the car may be in stationary service. 
Chuck Peck

On Tue, Mar 17, 2020 at 12:31 PM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

Photo: B&O Tank Car X10

A Doug Lilly photo:

https://www.flickr.com/photos/149706553@N05/27073486079/in/album-72157689269937726/

Caption: "The Baltimore & Ohio kept company-service tank cars at some of its engine facilities, presumably for fuel storage. Photos exist showing cars that appear to be of later vintage, but this example at Glenwood Yard near Pittsburgh looks to be of a prewar design. With its stirrup steps mounted away from the corners and transverse brake wheel, this care has features consistent with UTLX tank cars from the 1930’s."

I assume the presence of single vertical rivet rows along the body indicates this tank car was built early in the 1900s.

So what do we have here?

Thanks.

Bob Chaparro

Hemet, CA


Adjusting the gondola fleet

Fran Giacoma
 

I am in the process of right sizing my freight car fleet due to a slight operational change on my HO B&O Shenandoah SD layout. It is set in late September 1956 and I use an October 1956 ORER (plus other publications) to make sure my fleet is accurate. 

I am looking for a list of railroads and the number of gondola cars they operated during the specified time period in order to try to accurately portray the right amount of them in my fleet; in other words, which road names would you most likely see on the layout. I would adjust this by the industries that use them, B&O interchange partners and locations, and the general locale of what is being modeled (northern Virginia and West Virginia starting at Harpers Ferry and running south west). The ORER does not contain this list; it has lists for other types of cars.

 

Any help would be appreciated. Thanks. 

 

Fran Giacoma


Re: New '37 AAR box cars with Deco and NSC-2 ends

Schuyler Larrabee
 

And if he can be contacted by email . . .

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Randy Hammill
Sent: Tuesday, March 17, 2020 4:57 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] New '37 AAR box cars with Deco and NSC-2 ends

 

From the catalog of photos he gave me at CCB:

Keith Retterer
1442 East Bank Dr.
Marietta, GA 30068

Now I’m curious as to what else he has...

Randy
--

Randy Hammill
Prototype Junction
http://prototypejunction.com

Modeling the New Haven Railroad 1946-1954
http://newbritainstation.com


Re: New '37 AAR box cars with Deco and NSC-2 ends

Randy Hammill
 

From the catalog of photos he gave me at CCB:

Keith Retterer
1442 East Bank Dr.
Marietta, GA 30068

Now I’m curious as to what else he has...

Randy
--

Randy Hammill
Prototype Junction
http://prototypejunction.com

Modeling the New Haven Railroad 1946-1954
http://newbritainstation.com


Re: Priming w/Yellow

Aley, Jeff A
 

Personally tried it?  No.  But there was an article in MR about it.  IIRC, the Liquitex airbrush thinner and Liquitex Flow-aid were the keys to making it work.  I can’t find an online index to MR (I tried…) or I would cite the exact issue.

 

Regards,

 

-Jeff

 

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Jim Betz
Sent: Tuesday, March 17, 2020 8:36 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Priming w/Yellow

 

  Has anyone tried using any of the craft acrylics in their air brush?  There
are many selections of color.  Be careful to not "go cheaper" - for most of
them there is a direct relationship between the amount of pigment in the
bottle and the cost and usually (especially for airbrushing?) more pigment
is better since you are thinning it out so much.
  I use craft acrylics for weathering washes all the time but haven't tried
shooting it.
  The bottle above looks exactly like the craft paints I buy at Michael''s or
other such places.  Suck it up - just because you are the only man in 
the store doesn't mean you have to wear time of the month protection 
to go in.
                                                                                 - Jim


Re: T & P 40915

Hudson Leighton <hudsonl@...>
 

These are actually Northern Pacific Ry. Joint Facility Photos, I don't have the notes, but they would say "G: served by xyz RR & NP."

They have every joint track, and industry photographed and labeled.  

So you could send a message saying "page X, Item B the crossover that you pay 43.234% of costs has been repaired, here is the bill"

Neat books, I have one for the Minneapolis/St. Paul area in my collection.

-Hudson


Re: Photos of B&O M-8 box cars

Eric Hansmann
 

Eric,

 

I’ve been gathering photos and details on these cars. The M-8 class is largely forgotten, even though the cars dominated the fleet for several years. I’ll be in touch off-list.

 

 

Eric Hansmann

Murfreesboro, TN

 

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Eric Lombard
Sent: Monday, March 16, 2020 9:57 AM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] Photos of B&O M-8 box cars

 

Good Morning Fellow Shut-ins...

I am working on an overall history of the 21,000 class M-8 box cars built for the B&O, B&OSW, and P&W.  The majority were built by Pullman as documented by Eric Neubauer. They were in service from 7-1896 to 1929 with original wood underframe. About 12,400 were rebuilt to steel center sills, M-8B, -8C, or underframe, M-8A, as well as US Safety Appliance Standards over 1912-1921. The last of these, #185901, M-8C, is listed in the 1-1940 B&O Summary of Equipment. These rebuilds  were accomplished by the B&O and several commercial builders.

It would be very helpful to me if some of you might share some photo scans and or point me to sources for same. Equipment diagrams indicate "iron roof". What did that look like? An additional 60 of M-8 dimensions were built as B&OSW 17700-17759 with double side doors over door openings of 10-0 and 10-8. What did these look like? They were renumbered to B&O 93000-93059 and rebuilt to steel center sills etc. as B&O 190600-190651. Some were also rebuilt to M-8B.

Advance thanks for any help you can share with me,

Eric Lombard
At home in Homewood, IL


Re: New '37 AAR box cars with Deco and NSC-2 ends

al.kresse <water.kresse@...>
 

For your reference . . . 

On March 17, 2020 at 2:03 PM Bob Chapman <chapbob611@...> wrote:

Clark Propst writes:
I built a C&O model years ago using a Des Plaines Viking roof kit. I used Keith Reterrer (sp) ends and doors....


A bit later, Sunshine issued the car as a kit, an enticing prototype to lighten my billfold at Naperville. No five-year wait, and the modeling opportunity -- priceless.    :)       I did the transition era paint/lettering scheme -- the as-delivered black was pretty much gone by then. And yes, it has avoided weathering shop so far....

Regards,
Bob Chapman



 


Re: New '37 AAR box cars with Deco and NSC-2 ends

Clark Propst
 

On Tue, Mar 17, 2020 at 11:03 AM, Bob Chapman wrote:
No five-year wait, and the modeling opportunity -- priceless.    :)  
Nice model Bob.
Caboose Stop Hobbies in Cedar Falls Ia. had one or two of the kits from a collection for $25 for a couple years! I didn't see them last time we were there...Although there was so much other stuff stacked in front of where they were it's hard to tell? Guess I shouldn't have passed on them?
CW Propst


Re: T & P 40915

Schuyler Larrabee
 

Any surmise what the G written on the negative, on the building, is all about?

Neat photo.


Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Hudson Leighton
Sent: Tuesday, March 17, 2020 1:40 PM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] T & P 40915

 

T & P 40915 circa 1926 possibly Puyallup, WA.


Re: Photo: B&O Tank Car X10

Charles Peck
 

The car appears to me to be missing a knuckle on the left end.  This suggests  the car may be in stationary service. 
Chuck Peck

On Tue, Mar 17, 2020 at 12:31 PM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

Photo: B&O Tank Car X10

A Doug Lilly photo:

https://www.flickr.com/photos/149706553@N05/27073486079/in/album-72157689269937726/

Caption: "The Baltimore & Ohio kept company-service tank cars at some of its engine facilities, presumably for fuel storage. Photos exist showing cars that appear to be of later vintage, but this example at Glenwood Yard near Pittsburgh looks to be of a prewar design. With its stirrup steps mounted away from the corners and transverse brake wheel, this care has features consistent with UTLX tank cars from the 1930’s."

I assume the presence of single vertical rivet rows along the body indicates this tank car was built early in the 1900s.

So what do we have here?

Thanks.

Bob Chaparro

Hemet, CA


Re: [Non-DoD Source] [RealSTMFC] Photo: B&O Tank Car X10

Dennis Storzek
 

Similar to this car at the Mid-Continent Railway Museum:

https://www.midcontinent.org/equipment-roster/steel-freight-cars/utlx-12283/

I wouldn't be surprised if the B&O purchased their tankcars second hand.

Dennis Storzek 


Re: Photo: Barrels in A Boxcar

Tony Thompson
 

Dennis Storzek wrote:

Subterfuge helped also; once sealed that carload of beer didn't look any different than a carload of anvils. Which is one of the reasons that all the gaudy brewery paint schemes disappeared from brewery owned cars early. Any value of advertising was more than offset by the increased pilferage that came with making the cars marked targets.

    Yet in the late 1950s, several brewers, including Miller and Pearl Beer, put their logos onto insulated box cars. (photos in the Hendrickson-Kaminski billboard reefer book) Maybe they began to value advertising again.


Tony Thompson




Re: New '37 AAR box cars with Deco and NSC-2 ends

Bob Chapman
 

Clark Propst writes:
I built a C&O model years ago using a Des Plaines Viking roof kit. I used Keith Reterrer (sp) ends and doors....


A bit later, Sunshine issued the car as a kit, an enticing prototype to lighten my billfold at Naperville. No five-year wait, and the modeling opportunity -- priceless.    :)       I did the transition era paint/lettering scheme -- the as-delivered black was pretty much gone by then. And yes, it has avoided weathering shop so far....

Regards,
Bob Chapman



T & P 40915

Hudson Leighton <hudsonl@...>
 

T & P 40915 circa 1926 possibly Puyallup, WA.


Re: [Non-DoD Source] [RealSTMFC] Photo: B&O Tank Car X10

Gatwood, Elden J SAD
 

Bob;

 

Although it does not have the characteristic UTLX defect card holders, the rest of the car looks to be a intended as a UTLX “Type X”, of pre-WW1 vintage, probably 1911+ or – 3.  Give-aways include: side of dome “elbow” safety vents, 5 course radial tank, indented steps, riveted built-up deep center sill, and transverse brake stand/wheel with associated rigging.

 

Hope that helps,

 

Elden Gatwood

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bob Chaparro via Groups.Io
Sent: Tuesday, March 17, 2020 12:32 PM
To: main@RealSTMFC.groups.io
Subject: [Non-DoD Source] [RealSTMFC] Photo: B&O Tank Car X10

 

Photo: B&O Tank Car X10

A Doug Lilly photo:

Blockedhttps://www.flickr.com/photos/149706553@N05/27073486079/in/album-72157689269937726/

Caption: "The Baltimore & Ohio kept company-service tank cars at some of its engine facilities, presumably for fuel storage. Photos exist showing cars that appear to be of later vintage, but this example at Glenwood Yard near Pittsburgh looks to be of a prewar design. With its stirrup steps mounted away from the corners and transverse brake wheel, this care has features consistent with UTLX tank cars from the 1930’s."

I assume the presence of single vertical rivet rows along the body indicates this tank car was built early in the 1900s.

So what do we have here?

Thanks.

Bob Chaparro

Hemet, CA


Re: C&O 40' 1930 Automobile Boxcar

Chuck Cover
 

I just measured my F&C model #6770 and it is the correct height as compared to the prototype schematic in the Freight Car Equipment of the C&O Railway, August 1, 1937.  They were built in 1930 and ran through the 60s.  I reason that I bought the kit was because they are a bit shorter in height than most automobile boxcars and give the consist and different look.  We don’t want all 10’4” 40’ auto boxcars do we?

 

Chuck Cover

Santa Fe, NM

14381 - 14400 of 185040