Date   

Re: New Run: Rapido HO Scale General American Meat Reefer

Bill Welch
 

Unfortunately Atlas choose to "Lionel'ize" these cars with grotesquely large operating hinges.

Bill Welch


Re: New Run: Rapido HO Scale General American Meat Reefer

Douglas Harding
 

Chuck if you are referring to the photos Todd posted, those are photos of Atlas models, not the Rapido model, nor are they photos of the prototype. The Atlas model came with four hinges. Atlas claimed the model was based upon a Cudahy car built in 1925, and I have a photo of a Cudahy reefer with four hinges that appears to match the Atlas model. The car in the photo was built in 1928. Four hinges were common on earlier reefers. Some early reefers also came with eight hinges. Six hinges became the defacto with most manufactures of wood cars sometime in the 20s or 30s. One reason I heard was if a hinge failed there was two other hinges on that door to hold it in place. Hinge familiar was commonly due to wood rotting because of the high moisture related to reefers. The doors were heavy because of the construction to contain the insulation and required seals.

 

There are photos of wood Swift reefers with only four hinges. Though the majority of photos show six hinges. This could be because very few photos were taken in the teens and twenties, when four hinges were more common.

 

I have never seen any data showing the number of cars broke down by number of hinges.

 

Doug  Harding

www.iowacentralrr.org

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Chuck Cover
Sent: Saturday, April 4, 2020 7:21 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] New Run: Rapido HO Scale General American Meat Reefer

 

The Swift reefers in the photo have doors with only 4 hinges, which stands out to me.  I think most reefers have doors with 6 hinges.  Can anyone tell me the difference?  Were the four hinge doors lighter weight or were the hinges more heavy duty?   How many reefer cars had the 4 hinge car?  I assume different manufacturers built the different doors.  Thanks

 

Chuck Cover

Santa Fe, NM


Re: New Run: Rapido HO Scale General American Meat Reefer

william darnaby
 

The rear cover photo on Morning Sun’s Refrigerator Car Color Guide shows two Swift red cars, one of which has only 4 hinges.  It’s number is 6544.

 

Bill Darnaby

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Chuck Cover
Sent: Saturday, April 4, 2020 7:21 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] New Run: Rapido HO Scale General American Meat Reefer

 

The Swift reefers in the photo have doors with only 4 hinges, which stands out to me.  I think most reefers have doors with 6 hinges.  Can anyone tell me the difference?  Were the four hinge doors lighter weight or were the hinges more heavy duty?   How many reefer cars had the 4 hinge car?  I assume different manufacturers built the different doors.  Thanks

 

Chuck Cover

Santa Fe, NM


Re: GN Safety Film from the 1940's with lots of Freight Cars

Clark Propst
 

Love that movie. A friend ran a hobby shop here in the 80s-90s and rented tapes. He had that one. I got a copy of it from him.
Thanks for pointing it out on U tube.
CW Propst


Re: New Run: Rapido HO Scale General American Meat Reefer

Donald B. Valentine <riverman_vt@...>
 

    With regard to the four hinge doors on meat cars I believe te majority of these were 36 ft. cars rather than 
the 37 most General American cars seem to have been. Swift rostered both, as did Cudahy, but I cannot recall 
ever seeing a photo of four hinge reefer longer than 36 ft. There seems to be a prototype for anythng, however.

Cordially, Don Valentine


Re: New Run: Rapido HO Scale General American Meat Reefer

Tim O'Connor
 

My favorite roof shots of Swift reefers.

On 4/3/2020 10:19 PM, Richard Townsend via groups.io wrote:
The Swift cars had BCR roofs, including the red cars. Obviously they weathered to streaky gray and red. I’ll defer to others on the silver, at least for the wood sided cars.


On Apr 3, 2020, at 5:30 PM, Todd Sullivan via groups.io <sullivant41=yahoo.com@groups.io> wrote:

Brian,

Nice catch.  My Rapido reefers are in storage in Syracuse, so I'd better make a note to check the SRLX car when we are reunited.  I'll also check my Sunshine kit that is painted but not assembled.  Hmmm, maybe I should dig it out and finish it during this corona virus lull.

Fun story: Tony Koester had 26 of those red Atlas reefers, and Atlas only produced about 6 numbers.  As occasional yardmaster in Frankfort's eastbound yard, I got awfully tired of seeing numbers repeat in a cut of Swift reefers from Kansas City.  So, I offered to rework them a bit and renumber them, working in batches of 4-5 cars.  The next operating session, Tony presented me with a box with all 26 (!) along with some dry transfer numbers that were exactly right for the Atlas lettering.  The dry transfers didn't work very well, and I decided it was easier to hand re-letter the cars.  I found that any of the numbers 0, 6 and 9, could be easily transformed into another of those numbers, and the same for 3, 6 and 8, so that's how they got renumbered.  I tried using decals for the journal repack data, and the first car took about 2.5 hours to get the decals settled into the scribed siding on both sides.  Nope, that wasn't going to work, either, so I faked the RPKD data with tiny dabs of white paint.  It works with the 2 foot rule - no one has mentioned that it isn't legible, and I still use the technique on my models!

Todd Sullivan
--
*Tim O'Connor*
*Sterling, Massachusetts*


Re: Model brake component size comparison to prototype

Tim O'Connor
 


As I recall, all Cal-Scale detail components were OVERSIZE because they were used
for lost wax casting! In that process the plastic parts are for the molds and are
destroyed in the casting process, and the shrinkage produces parts that are closer
to scale.

Or am I wrong? :-)

Tim O'Connor

========================================

On 4/4/2020 9:00 AM, Lester Breuer wrote:

A comparison of several manufacturers’ model brake component measurements to Westinghouse prototype brake component measurements prepared by George Toman was sent to me for my use.  I asked George to share his measurements comparison on my blog.  If you are interested in the  comparison measurements, they are now available on my blog I have to share photos and writeup of projects on my Minneapolis & Northland Railroad Company. If would like to take a look please do at the following link:

 

http://mnrailroadcab100.blogspot.com/

 

Lester Breuer



--
Tim O'Connor
Sterling, Massachusetts


Model brake component size comparison to prototype

Lester Breuer
 

A comparison of several manufacturers’ model brake component measurements to Westinghouse prototype brake component measurements prepared by George Toman was sent to me for my use.  I asked George to share his measurements comparison on my blog.  If you are interested in the  comparison measurements, they are now available on my blog I have to share photos and writeup of projects on my Minneapolis & Northland Railroad Company. If would like to take a look please do at the following link:

 

http://mnrailroadcab100.blogspot.com/

 

Lester Breuer

 


GN Safety Film from the 1940's with lots of Freight Cars

gtws00
 

I ran across an old GN Safety Training  Film from the 1940's. There are many photos of steam era freight cars in this film. 
https://www.youtube.com/watch?v=BqpayZ2JqlU

George Toman


Re: New Run: Rapido HO Scale General American Meat Reefer

Chuck Cover
 

The Swift reefers in the photo have doors with only 4 hinges, which stands out to me.  I think most reefers have doors with 6 hinges.  Can anyone tell me the difference?  Were the four hinge doors lighter weight or were the hinges more heavy duty?   How many reefer cars had the 4 hinge car?  I assume different manufacturers built the different doors.  Thanks

 

Chuck Cover

Santa Fe, NM


Re: Trainshed Cyclopedia Listing / Index

mel perry
 

charlie:
90 was the magic number, best sources,
railroadtreasures.com (stephans rr library), or epay, depending on where you
live, you might also check out the "o"
scale train shows, there are always
dealers there,
good luck
mel perry


Re: Trainshed Cyclopedia Listing / Index

Charlie Vlk
 

All-
Thanks for all the responses. Looks like 1-90 are the sum total of volumes.
I now only need three (5,9 &12) to complete my set if I responded to Al
Smith quickly enough!

Best regards and stay safe!!!
Charlie Vlk

-----Original Message-----
From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of
Richard Brennan
Sent: Friday, April 3, 2020 6:25 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Trainshed Cyclopedia Listing / Index

At 03:56 PM 4/3/2020, Charlie Vlk wrote:
Does anyone know how many Trainshed Cyclopedia volumes were issued?
Right now I am trying to organize my library and I am filing the most
valuable softcover books and magazines into cardboard file holders and
am wondering if there were any issued beyond No. 90.
Charlie
I've only had a list of 90 for the last few years:

--------------------
Richard Brennan - San Leandro CA
--------------------

1 Locomotives 1922
2 Switching & Freight Locomotives 1930
3 Box Stock Reefers 1931
4 Rules & Regulations
5 Gondolas & Hoppers 1940's
6 Passenger Locomotives
7 Buildings & Structures 1893
8 Passenger Cars 1931
9 War & Standard locomotives & Cars 1919
10 Rail Motor Cars 1919-1928
11 Caboose Cars 1879 - 1943
12 Tank Cars 1922-1943
13 Buildings & Structures 1893
14 4-8-4s and other Heavy Passenger Locomotives 1927-1941
15 Heavy Traction, Electric Locomotives 1922-1943
16 Passenger Trains 1943
17 Box Stock & Flat Cars 1943
18 Locomotives 1916
19 Buildings & Structures 1893
20 Diesel Electric Locomotives 1925-1938
21 Passenger Cars 1943
22 Steam Locomotives
23 Steam Locomotives & Tenders 1938
24 Buildings & Structures 1893
25 Electric Motor Cars 1888-1928
26 Railway Service Cars 1928-1943
27 Signals & Signal Symbols
28 Cars, Scales & Gates 1909
29 Freight Cars 1892
30 Rail Motor Cars 1919-1928
31 Locomotives 1927
32 Locomotives Tenders Trucks 1927
33 Buildings & Structures 1893
34 Shays & Other Geared Locomotives
35 Freight Cars 1919 (Part 1)
36 Freight Cars 1919 (Part 2)
37 Industrial & Foreign Locomotives/Service Equipment 1930-36
38 Buildings & Structures 1893
39 Passenger cars 1892
40 Locomotive Cabs & Fittings 1927
41 Locomotive Cabs & Fittings 1927
42 Passenger Cars 1919

Index Index Train Shed cyclopedia volumes 1-42 index

43 Diesel & Oil Electric Locomotives 1930-1936
44 Locomotives 1913 & 1919
45 Steam Locomotives 1940-1950's
46 Flats Gondolas & Hoppers 1931
47 Steam Locomotives 1940-1950's
48 Hoppers Industrials & Lettering 1931
49 Steam Locomotives 1940-1950's
50 Steam Locomotives 1940-1950's
51 Steam Locomotives 1940-1950's
52 Steam Locomotives 1919
53 Steam Locomotives 1919
54 Bridges & Trestles
55 Freight & Passenger Cars 1898 (Part 1)
56 Steam Locomotives 1940-1950's
57 Freight & Passenger Cars 1898 (Part 2)
58 Diesel Locomotives 1940-1950's
59 Freight & Passenger Cars 1898
60 Diesel Locomotives 1940-1950's
61 Box Stock Reefers 1925
62 Flats Gondolas & Hoppers 1925 (Part 2)
63 Dump Cars, Tanks, Cabooses, Passenger Cars 1925
64 Diesel Locomotives 1940-1950's
65 Passengers, Postals, Motor Cars 1925
66 Electric & Turbine Locomotives 1940-1950's
67 Passenger Details, Trucks & Industrials 1925
68 Passenger Details, Trucks & Industrials 1925
69 Locomotive Photos 1912
70 Gondolas & Hoppers 1943
71 Hoppers, Tanks, Container Cars & Cabooses 1943
72 Locomotive Drawings 1912
73 Freight & Passenger Cars, Shops & Terminals 1940-1950's [1]
74 Smoke Box Stoker Valve Gears & Trucks 1912
75 Cabooses & Freight Car 1943
76 Cow Catchers, Cabs & Fittings, Tenders 1912
77 Freight Car Construction Details 1943
78 Electric Locomotives & Motor Cars 1912
79 Freight & Passenger Cars, Shops & Terminals 1940-1950's [2]
80 Steam Diesel Electric Locomotives 1940-1950's
81 Freight Car Construction Details 1943
82 Boilers 1919
83 Freight Car Construction Details 1943
84 Smoke Boxes & Stokers 1919
85 Freight & Passenger Cars, Shops & Terminals 1940-1950's [3]
86 Motor Cars & Passenger Construction details 1943
87 Frames Cylinders Valve Gears 1919
88 Passenger Car Construction Details 1943
89 Pistons Trucks 1919
90 Freight & Passenger Cars, Shops & Terminals 1940-1950's [4]


Re: New Run: Rapido HO Scale General American Meat Reefer

Richard Townsend
 

The Swift cars had BCR roofs, including the red cars. Obviously they weathered to streaky gray and red. I’ll defer to others on the silver, at least for the wood sided cars.


On Apr 3, 2020, at 5:30 PM, Todd Sullivan via groups.io <sullivant41@...> wrote:

Brian,

Nice catch.  My Rapido reefers are in storage in Syracuse, so I'd better make a note to check the SRLX car when we are reunited.  I'll also check my Sunshine kit that is painted but not assembled.  Hmmm, maybe I should dig it out and finish it during this corona virus lull.

Fun story: Tony Koester had 26 of those red Atlas reefers, and Atlas only produced about 6 numbers.  As occasional yardmaster in Frankfort's eastbound yard, I got awfully tired of seeing numbers repeat in a cut of Swift reefers from Kansas City.  So, I offered to rework them a bit and renumber them, working in batches of 4-5 cars.  The next operating session, Tony presented me with a box with all 26 (!) along with some dry transfer numbers that were exactly right for the Atlas lettering.  The dry transfers didn't work very well, and I decided it was easier to hand re-letter the cars.  I found that any of the numbers 0, 6 and 9, could be easily transformed into another of those numbers, and the same for 3, 6 and 8, so that's how they got renumbered.  I tried using decals for the journal repack data, and the first car took about 2.5 hours to get the decals settled into the scribed siding on both sides.  Nope, that wasn't going to work, either, so I faked the RPKD data with tiny dabs of white paint.  It works with the 2 foot rule - no one has mentioned that it isn't legible, and I still use the technique on my models!

Todd Sullivan


Re: Trainshed Cyclopedia Listing / Index

Allan Smith
 

Charlie I Have No 6, 8, 9, 10 11, 14, 16, 18 20, 21, 22, 23, 27 54, 58,61, 70, 71. If anyone is interested I will sell for $5.00 plus shipping.

Al Smith
Sonora CA 
Smithal9@...

On Friday, April 3, 2020, 04:25:28 PM PDT, Richard Townsend via groups.io <richtownsend@...> wrote:


Here's a link to a listing of the first 50:

http://sbiii.com/rr1.html#ts-index

Richard Townsend
Lincoln City, OR


-----Original Message-----
From: Charlie Vlk <cvlk@...>
To: RealSTMFC <RealSTMFC@groups.io>
Sent: Fri, Apr 3, 2020 3:56 pm
Subject: [RealSTMFC] Trainshed Cyclopedia Listing / Index

All-
On topic because these publications did contain a good bit of Steam Era
Freight Car information:
Does anyone know how many Trainshed Cyclopedia volumes were issued?
Right now I am trying to organize my library and I am filing the most
valuable softcover books and magazines into cardboard file holders and am
wondering if there were any issued beyond No. 90.
It looks like I am only missing seven from the first 16 and would like to
complete the series.
Thank you,
Charlie





Illinois Central Shippers Guide

Ted Schnepf
 

Hello Everyone,

I have a new shippers guide reprint. This time it is the Illinois Central railroad.

It is dated,1967 to 1970. This time frame is just before the merger of the GMO, when IC was at its full extent running into Wisconsin, Minnesota, South Dakota, and Nebraska, on the north, and Louisiana, Mississippi and Alabama at the south end. It was a big railroad serving many communities. The book is arranged by towns in alphabetical order. the first town is Abbeville, Miss with only one industry, and the last town is Zeigler, Il. with its coal mine and several normal community support industries.

The book is large, being 285 pages. You can see over the years where pages were added and they have A, B and C suffixes. I also believe the industry listings are older than the dates suggest. In looking at my home town in Northwest Iowa, there are several industries from the 1940's that were no longer shipping or even in existence by 1967, that are listed, and by the same token a new industry in town, built in the late 1960's is included. So I would call this book a industry listing from the 1950's through 1970.

This is a copy of a copy, so about 5% the pages are hard to read. As with past books it has a comb binding, so the 8x10" pages, lay flat when in use. These books are meant to be used as references and marked up as you see fit.

This book is $34.95 plus shipping. It joins my other recent books, including L&N and CNW, that can be seen at my website Rails Unlimited. There are now 22 shippers guides listed, covering many time periods and geographic areas of the US.

Contact me off list to order the book.

Rails Unlimited
Ted Schnepf
126 Will Scarlet
Elgin, Ill. 60120
847=697-5353


Re: New Run: Rapido HO Scale General American Meat Reefer

Todd Sullivan
 

Brian,

Nice catch.  My Rapido reefers are in storage in Syracuse, so I'd better make a note to check the SRLX car when we are reunited.  I'll also check my Sunshine kit that is painted but not assembled.  Hmmm, maybe I should dig it out and finish it during this corona virus lull.

Fun story: Tony Koester had 26 of those red Atlas reefers, and Atlas only produced about 6 numbers.  As occasional yardmaster in Frankfort's eastbound yard, I got awfully tired of seeing numbers repeat in a cut of Swift reefers from Kansas City.  So, I offered to rework them a bit and renumber them, working in batches of 4-5 cars.  The next operating session, Tony presented me with a box with all 26 (!) along with some dry transfer numbers that were exactly right for the Atlas lettering.  The dry transfers didn't work very well, and I decided it was easier to hand re-letter the cars.  I found that any of the numbers 0, 6 and 9, could be easily transformed into another of those numbers, and the same for 3, 6 and 8, so that's how they got renumbered.  I tried using decals for the journal repack data, and the first car took about 2.5 hours to get the decals settled into the scribed siding on both sides.  Nope, that wasn't going to work, either, so I faked the RPKD data with tiny dabs of white paint.  It works with the 2 foot rule - no one has mentioned that it isn't legible, and I still use the technique on my models!

Todd Sullivan


Re: New Run: Rapido HO Scale General American Meat Reefer

Brian Carlson
 

I know that yard. Lol. The big change for the rapido reefers you need to remove the tabs sill on the Swift reefers. The sill needs to be full length. 

Brian J. Carlson 

On Apr 3, 2020, at 7:29 PM, Todd Sullivan via groups.io <sullivant41@...> wrote:

I don't know about the Barber S-1 trucks, Bill, but you could ask Rapido about making them available.  I think they are pretty open to ideas from modelers.

About the Swift reefers, the cars in both color schemes are numbered in the 2500-2874 series, which was the last Swift model that Sunshine did.  Swift did have these cars.  The 'red banner' scheme was short lived, IRRC, and was succeeded by the red, white and silver (roof) scheme. 

Actually, in the photos I've seen of the red scheme, Swift initially only painted the sides and ends, so the roofs showed all the board-by-board replacements of rotted roofing over time, in colors ranging from dark pink to light pink to light gray.  I suspect Swift did that because they wanted to get the whole car fleet repainted quickly and figured that no one at ground level could see the roofs, LOL.  Eventually, they started painting the roofs silver.  I've added a photo of two Atlas Swift reefers I reworked a bit for someone else.  I wish I had better photos to show the variety of roof colors, but they were all done following photos in an article in Railmodel Journal on Swift reefers.

Todd Sullivan 
<20170226_124357.jpg>
<SRLX 5103 3-4 Aend top.JPG>


Re: New Run: Rapido HO Scale General American Meat Reefer

Todd Sullivan
 

I don't know about the Barber S-1 trucks, Bill, but you could ask Rapido about making them available.  I think they are pretty open to ideas from modelers.

About the Swift reefers, the cars in both color schemes are numbered in the 2500-2874 series, which was the last Swift model that Sunshine did.  Swift did have these cars.  The 'red banner' scheme was short lived, IRRC, and was succeeded by the red, white and silver (roof) scheme. 

Actually, in the photos I've seen of the red scheme, Swift initially only painted the sides and ends, so the roofs showed all the board-by-board replacements of rotted roofing over time, in colors ranging from dark pink to light pink to light gray.  I suspect Swift did that because they wanted to get the whole car fleet repainted quickly and figured that no one at ground level could see the roofs, LOL.  Eventually, they started painting the roofs silver.  I've added a photo of two Atlas Swift reefers I reworked a bit for someone else.  I wish I had better photos to show the variety of roof colors, but they were all done following photos in an article in Railmodel Journal on Swift reefers.

Todd Sullivan 


Re: Trainshed Cyclopedia Listing / Index

Richard Townsend
 

Here's a link to a listing of the first 50:

http://sbiii.com/rr1.html#ts-index

Richard Townsend
Lincoln City, OR


-----Original Message-----
From: Charlie Vlk <cvlk@...>
To: RealSTMFC <RealSTMFC@groups.io>
Sent: Fri, Apr 3, 2020 3:56 pm
Subject: [RealSTMFC] Trainshed Cyclopedia Listing / Index

All-
On topic because these publications did contain a good bit of Steam Era
Freight Car information:
Does anyone know how many Trainshed Cyclopedia volumes were issued?
Right now I am trying to organize my library and I am filing the most
valuable softcover books and magazines into cardboard file holders and am
wondering if there were any issued beyond No. 90.
It looks like I am only missing seven from the first 16 and would like to
complete the series.
Thank you,
Charlie





Re: Trainshed Cyclopedia Listing / Index

Richard Brennan
 

At 03:56 PM 4/3/2020, Charlie Vlk wrote:
Does anyone know how many Trainshed Cyclopedia volumes were issued?
Right now I am trying to organize my library and I am filing the most
valuable softcover books and magazines into cardboard file holders and am
wondering if there were any issued beyond No. 90.
Charlie
I've only had a list of 90 for the last few years:

--------------------
Richard Brennan - San Leandro CA
--------------------

1 Locomotives 1922
2 Switching & Freight Locomotives 1930
3 Box Stock Reefers 1931
4 Rules & Regulations
5 Gondolas & Hoppers 1940's
6 Passenger Locomotives
7 Buildings & Structures 1893
8 Passenger Cars 1931
9 War & Standard locomotives & Cars 1919
10 Rail Motor Cars 1919-1928
11 Caboose Cars 1879 - 1943
12 Tank Cars 1922-1943
13 Buildings & Structures 1893
14 4-8-4s and other Heavy Passenger Locomotives 1927-1941
15 Heavy Traction, Electric Locomotives 1922-1943
16 Passenger Trains 1943
17 Box Stock & Flat Cars 1943
18 Locomotives 1916
19 Buildings & Structures 1893
20 Diesel Electric Locomotives 1925-1938
21 Passenger Cars 1943
22 Steam Locomotives
23 Steam Locomotives & Tenders 1938
24 Buildings & Structures 1893
25 Electric Motor Cars 1888-1928
26 Railway Service Cars 1928-1943
27 Signals & Signal Symbols
28 Cars, Scales & Gates 1909
29 Freight Cars 1892
30 Rail Motor Cars 1919-1928
31 Locomotives 1927
32 Locomotives Tenders Trucks 1927
33 Buildings & Structures 1893
34 Shays & Other Geared Locomotives
35 Freight Cars 1919 (Part 1)
36 Freight Cars 1919 (Part 2)
37 Industrial & Foreign Locomotives/Service Equipment 1930-36
38 Buildings & Structures 1893
39 Passenger cars 1892
40 Locomotive Cabs & Fittings 1927
41 Locomotive Cabs & Fittings 1927
42 Passenger Cars 1919

Index Index Train Shed cyclopedia volumes 1-42 index

43 Diesel & Oil Electric Locomotives 1930-1936
44 Locomotives 1913 & 1919
45 Steam Locomotives 1940-1950's
46 Flats Gondolas & Hoppers 1931
47 Steam Locomotives 1940-1950's
48 Hoppers Industrials & Lettering 1931
49 Steam Locomotives 1940-1950's
50 Steam Locomotives 1940-1950's
51 Steam Locomotives 1940-1950's
52 Steam Locomotives 1919
53 Steam Locomotives 1919
54 Bridges & Trestles
55 Freight & Passenger Cars 1898 (Part 1)
56 Steam Locomotives 1940-1950's
57 Freight & Passenger Cars 1898 (Part 2)
58 Diesel Locomotives 1940-1950's
59 Freight & Passenger Cars 1898
60 Diesel Locomotives 1940-1950's
61 Box Stock Reefers 1925
62 Flats Gondolas & Hoppers 1925 (Part 2)
63 Dump Cars, Tanks, Cabooses, Passenger Cars 1925
64 Diesel Locomotives 1940-1950's
65 Passengers, Postals, Motor Cars 1925
66 Electric & Turbine Locomotives 1940-1950's
67 Passenger Details, Trucks & Industrials 1925
68 Passenger Details, Trucks & Industrials 1925
69 Locomotive Photos 1912
70 Gondolas & Hoppers 1943
71 Hoppers, Tanks, Container Cars & Cabooses 1943
72 Locomotive Drawings 1912
73 Freight & Passenger Cars, Shops & Terminals 1940-1950's [1]
74 Smoke Box Stoker Valve Gears & Trucks 1912
75 Cabooses & Freight Car 1943
76 Cow Catchers, Cabs & Fittings, Tenders 1912
77 Freight Car Construction Details 1943
78 Electric Locomotives & Motor Cars 1912
79 Freight & Passenger Cars, Shops & Terminals 1940-1950's [2]
80 Steam Diesel Electric Locomotives 1940-1950's
81 Freight Car Construction Details 1943
82 Boilers 1919
83 Freight Car Construction Details 1943
84 Smoke Boxes & Stokers 1919
85 Freight & Passenger Cars, Shops & Terminals 1940-1950's [3]
86 Motor Cars & Passenger Construction details 1943
87 Frames Cylinders Valve Gears 1919
88 Passenger Car Construction Details 1943
89 Pistons Trucks 1919
90 Freight & Passenger Cars, Shops & Terminals 1940-1950's [4]

15081 - 15100 of 186205