Date   

Re: WAG CARS [WAS GATC Type 17]

Schleigh Mike
 

Modest clarification to item below----WAG 200-202 first appeared in the July 1956 ORER.

Mike Schleigh, still in Grove City, Penna.

On Wednesday, May 29, 2019, 9:25:47 AM EDT, Schleigh Mike <mike_schleigh@...> wrote:


Hello Garth!  And Group!

You put a lot out there, Garth.  Let me make a few points.

WAG 200-202 were the first and only ORER entries for the new RR which began operations on the first day of 1956.  They are the only entries in the January 1957 edition.  These cars have never been documented 'off-line' other than to visit the connecting C&PA.

The 1954 time is the incorporation date of the WAG Corp.

WAG 3000 was a B&O O-59 and the first of eight on the road.  (No O-59a cars but how do you tell the difference?)

WAG 3000 as the Tangent model is wholly appropriate for "our time" as it was on the road sometime before 1960, however not in the FCR of the model.  3000 was painted totally in the orange of the Salzberg roads and stenciled in black using a different style of lettering.  It was used in fleshing service.

WAG 3100 was similarly early on the road and painted orange.  It was one of the 1000 cars of B&O O-41 class.  About 1961 three more followed onto the WAG.

WAG 4100-4103 came to the road in 1957 and were on-the-road in August.  These were the only WAG cars painted in the cream yellow and tangerine orange of the Salzberg company that went off line.  The were used for merchandise service.  All four were the so-called B-2 class from the Rock Island, three from 1924, one from 1927 with the radial roof and Klassing hand brake.

WAG 5000 series cars are the former B&M XM-1 boxcars of 1929-1930.  The first of these arrived in the spring of 1958.  By the late 1960s, over 500 were on the road.  The 6000 series were the first to have running boards removed and "A" end ladders cut down, obviously after 'our time.'

Any more WAG questions?

Regards from Grove City, Penna.   Mike Schleigh

On Wednesday, May 29, 2019, 5:33:25 AM EDT, Garth Groff <sarahsan@...> wrote:


Friends,

I can't say when tank cars 200-202 came to the WAG, but they are listed in my 1958 ORER.  The WAG began operations in either 1954 or 1956 (confusingly Wikipedia offers both dates), so this is a pretty tight window for us.


A single 52' mill gondola is listed as 3000, a 140,000 lb car at 1745 cu ft and with an overall length of 55' 7" (Duryea underframe), which matches two series of ex-B&O cars (259000-260449, previously covered by Tangent, and 260500-263229, their current offering). Henry Maywald's CLASSIC FREIGHT CARS V. 6 has a photo of 3005 on page 48, which gives a build date of 1937. The new Tangent cars are very nice, but in WAG lettering are apparently too late for our period of interest without a number change to 3000.
Also listed is 3100, a 100,000 lb 50' car at 1523 cu ft with a more common overall length of 52' 7'.

Also present are "steel underframe" boxcars 4100-4103, followed 5001-5074 marked as a new addition in my book.

Here is my one souvenir of the WAG, a car I shot in Roseville around 1968. The 60XX series is not shown in my ORER.



Yours Aye,


Garth Groff

On 5/28/19 11:03 PM, Dan Smith wrote:


Re: GATC Type 17

Schleigh Mike
 

Thank you Dan!

For the photo of WAG 5009 at Galeton in 1960 with the partial of WAG 200.  (I own the original slide but prints from it were commercially sold in past years.)  WAG 202 was one of the 400 PTCCo tankers Sinclair bought in 1917.  Its number was SDRX 13812.  Oddly, WAG photos of it are typified by the one you posted, only partial views of the car.  The one full view I have is of the car second-back in the string.  "Dots'--four of them--on the dome were a WAG practice carry-over from Sinclair.

By the way WAG 5009 is the only WAG XM-1 I know of that served in hide service, albeit, after our time.

Regards from Grove City, Penna.   Mike Schleigh


Re: WAG CARS [WAS GATC Type 17]

Schleigh Mike
 

Hello Garth!  And Group!

You put a lot out there, Garth.  Let me make a few points.

WAG 200-202 were the first and only ORER entries for the new RR which began operations on the first day of 1956.  They are the only entries in the January 1957 edition.  These cars have never been documented 'off-line' other than to visit the connecting C&PA.

The 1954 time is the incorporation date of the WAG Corp.

WAG 3000 was a B&O O-59 and the first of eight on the road.  (No O-59a cars but how do you tell the difference?)

WAG 3000 as the Tangent model is wholly appropriate for "our time" as it was on the road sometime before 1960, however not in the FCR of the model.  3000 was painted totally in the orange of the Salzberg roads and stenciled in black using a different style of lettering.  It was used in fleshing service.

WAG 3100 was similarly early on the road and painted orange.  It was one of the 1000 cars of B&O O-41 class.  About 1961 three more followed onto the WAG.

WAG 4100-4103 came to the road in 1957 and were on-the-road in August.  These were the only WAG cars painted in the cream yellow and tangerine orange of the Salzberg company that went off line.  The were used for merchandise service.  All four were the so-called B-2 class from the Rock Island, three from 1924, one from 1927 with the radial roof and Klassing hand brake.

WAG 5000 series cars are the former B&M XM-1 boxcars of 1929-1930.  The first of these arrived in the spring of 1958.  By the late 1960s, over 500 were on the road.  The 6000 series were the first to have running boards removed and "A" end ladders cut down, obviously after 'our time.'

Any more WAG questions?

Regards from Grove City, Penna.   Mike Schleigh

On Wednesday, May 29, 2019, 5:33:25 AM EDT, Garth Groff <sarahsan@...> wrote:


Friends,

I can't say when tank cars 200-202 came to the WAG, but they are listed in my 1958 ORER.  The WAG began operations in either 1954 or 1956 (confusingly Wikipedia offers both dates), so this is a pretty tight window for us.


A single 52' mill gondola is listed as 3000, a 140,000 lb car at 1745 cu ft and with an overall length of 55' 7" (Duryea underframe), which matches two series of ex-B&O cars (259000-260449, previously covered by Tangent, and 260500-263229, their current offering). Henry Maywald's CLASSIC FREIGHT CARS V. 6 has a photo of 3005 on page 48, which gives a build date of 1937. The new Tangent cars are very nice, but in WAG lettering are apparently too late for our period of interest without a number change to 3000.
Also listed is 3100, a 100,000 lb 50' car at 1523 cu ft with a more common overall length of 52' 7'.

Also present are "steel underframe" boxcars 4100-4103, followed 5001-5074 marked as a new addition in my book.

Here is my one souvenir of the WAG, a car I shot in Roseville around 1968. The 60XX series is not shown in my ORER.



Yours Aye,


Garth Groff

On 5/28/19 11:03 PM, Dan Smith wrote:


Re: Removing car numbers on Walthers cars. (Super Clean Degreaser)

Nelson Moyer
 

Too long is a relative term. I soaked my Accurail hopper for five days to finally get all of the paint off. Other plastics may behave differently.

 

Nelson Moyer

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Bob Chaparro via Groups.Io
Sent: Wednesday, May 29, 2019 1:56 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Removing car numbers on Walthers cars. (Super Clean Degreaser)

 

A couple of comments from the Model Railroads of Southern California website about Super Clean Degreaser.

Bob Chaparro

Hemet, CA

++++

Rick Watson: "Do not use this on brass models. It eats solder. Ask me how I know..."

Anton Bruce: "And if you soak plastic car bodies or other parts for too long...it will melt and/or warp THEM as well. And I speak from experience on that, too."


Re: (Not A Freight Car) Slanted Loading Dock

Donald B. Valentine <riverman_vt@...>
 

     The slight slope on that dock makes perfect sense to me, Bob. Most docks I have seen were
wood and uncovered but if concrete is used and it is covered why not use a slight slope so that any
wind borne rain that blows in can drain easily. But the heck with the dock, LOOK at that neat DL&W
boxcar! Note not only the Carmer cut levers but the neat castings to prevent the nuts on the ends of
the truss rods from cutting into the wood. The two more central ones do not need these because they
come through the end of the casting forming the upper part of the coupler pocket and shared by the
ends of both. And once again look at the board through the turnbuckles to lock them in place and
keep them from losing tension from vibration as I pointed out in another such photo a year or two a
ago here. Wood ladder stiles, simple wrought iron rungs and note the cut out in the fascia for the
retainer. Just wish I could see the beam a little better that the queen posts are mountedon. What
a neat car! I'd love to see a Kadee quality version of this one and would quickly buy 4 or 5.

Cordially, Don Valentine


Re: (Not A Freight Car) Slanted Loading Dock

Paul Doggett
 

Those were my thoughts also.

Paul Doggett.  England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 


On 29 May 2019, at 00:39, Patrick Wade <patwadesb@...> wrote:

My first thought is that it makes it easier to roll barrels and kegs onto freight cars. It would be interesting to see if there are any sort of guides on the deck to direct the barrels to the car door way. Bur I have never seen any other slanted docks.

Pat Wade
Santa Barbara, CA

On Tue, May 28, 2019 at 4:08 PM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

I noticed the loading dock in this photo (which does feature a freight car) has a pronounced slant:

http://lists.railfan.net/erielackphoto.cgi?erielack-05-26-19/X6991.jpg

This is the first slanted loading dock I've seen. Is such a design highly unusual or just not so common?

Bob Chaparro

Hemet, CA


WAG CARS [WAS GATC Type 17]

Garth Groff <sarahsan@...>
 

Friends,

I can't say when tank cars 200-202 came to the WAG, but they are listed in my 1958 ORER.  The WAG began operations in either 1954 or 1956 (confusingly Wikipedia offers both dates), so this is a pretty tight window for us.


A single 52' mill gondola is listed as 3000, a 140,000 lb car at 1745 cu ft and with an overall length of 55' 7" (Duryea underframe), which matches two series of ex-B&O cars (259000-260449, previously covered by Tangent, and 260500-263229, their current offering). Henry Maywald's CLASSIC FREIGHT CARS V. 6 has a photo of 3005 on page 48, which gives a build date of 1937. The new Tangent cars are very nice, but in WAG lettering are apparently too late for our period of interest without a number change to 3000.
Also listed is 3100, a 100,000 lb 50' car at 1523 cu ft with a more common overall length of 52' 7'.

Also present are "steel underframe" boxcars 4100-4103, followed 5001-5074 marked as a new addition in my book.

Here is my one souvenir of the WAG, a car I shot in Roseville around 1968. The 60XX series is not shown in my ORER.



Yours Aye,


Garth Groff


Re: Removing car numbers on Walthers cars. (Super Clean Degreaser)

Bob Chaparro
 

A couple of comments from the Model Railroads of Southern California website about Super Clean Degreaser.

Bob Chaparro

Hemet, CA

++++

Rick Watson: "Do not use this on brass models. It eats solder. Ask me how I know..."

Anton Bruce: "And if you soak plastic car bodies or other parts for too long...it will melt and/or warp THEM as well. And I speak from experience on that, too."


Re: GATC Type 17

 


Re: (Not A Freight Car) Slanted Loading Dock

Patrick Wade
 

My first thought is that it makes it easier to roll barrels and kegs onto freight cars. It would be interesting to see if there are any sort of guides on the deck to direct the barrels to the car door way. Bur I have never seen any other slanted docks.

Pat Wade
Santa Barbara, CA

On Tue, May 28, 2019 at 4:08 PM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

I noticed the loading dock in this photo (which does feature a freight car) has a pronounced slant:

http://lists.railfan.net/erielackphoto.cgi?erielack-05-26-19/X6991.jpg

This is the first slanted loading dock I've seen. Is such a design highly unusual or just not so common?

Bob Chaparro

Hemet, CA


(Not A Freight Car) Slanted Loading Dock

Bob Chaparro
 

I noticed the loading dock in this photo (which does feature a freight car) has a pronounced slant:

http://lists.railfan.net/erielackphoto.cgi?erielack-05-26-19/X6991.jpg

This is the first slanted loading dock I've seen. Is such a design highly unusual or just not so common?

Bob Chaparro

Hemet, CA


Re: GATC Type 17

Tim O'Connor
 


i'd be sorely tempted to buy one :-)


On 5/28/2019 5:47 PM, D. Scott Chatfield wrote:
So now that Tangent has just announced their Bethlehem gon in WAG, how long before they do their GATC Type 17 in WAG?.....


Scott Chatfield


--
Tim O'Connor
Sterling, Massachusetts


Re: GATC Type 17

D. Scott Chatfield
 

So now that Tangent has just announced their Bethlehem gon in WAG, how long before they do their GATC Type 17 in WAG?.....


Scott Chatfield


Photo: Delivering A 1957 Chevy

Andy Carlson
 

If it were not in PA., this could have been the delivery of our Southern California 1957 4-door Chevy. As a kid, I remember being troubled--should I be glad to have a 57 Chevy, or embarrased to have a 4-door. Ours was two tone yellow/white.
-Andy Carlson
Ojai CA

On Tuesday, May 28, 2019, 1:19:58 PM PDT, Schleigh Mike via Groups.Io <mike_schleigh@...> wrote:


Model Railroader, in their September 1958 issue, presented an article on scratch building these unique cars.

Regards from Mike Schleigh in Grove City, Penna., in the middle of heavy weather.

On Monday, May 27, 2019, 9:50:13 PM EDT, Benjamin Hom <b.hom@...> wrote:


Bob Chaparro wrote:
"Photo: Delivering A 1957 Chevy
End door boxcar:
https://66.media.tumblr.com/c3b25a8a106e913adac4a0061d1acb77/tumblr_n7jd1n0aG81qcdxvpo1_1280.jpg 

Actually enclosed bi-level auto racks. These cars lacked side doors.  Sylvan once offered resin models of these early CN cars in HO scale.  CN later lengthened the design to 75 ft, and these cars were acquired by Auto-Train Corporation, later going to Amtrak.


Ben Hom


Re: Photo: Delivering A 1957 Chevy

Schleigh Mike
 

Model Railroader, in their September 1958 issue, presented an article on scratch building these unique cars.

Regards from Mike Schleigh in Grove City, Penna., in the middle of heavy weather.

On Monday, May 27, 2019, 9:50:13 PM EDT, Benjamin Hom <b.hom@...> wrote:


Bob Chaparro wrote:
"Photo: Delivering A 1957 Chevy
End door boxcar:
https://66.media.tumblr.com/c3b25a8a106e913adac4a0061d1acb77/tumblr_n7jd1n0aG81qcdxvpo1_1280.jpg 

Actually enclosed bi-level auto racks. These cars lacked side doors.  Sylvan once offered resin models of these early CN cars in HO scale.  CN later lengthened the design to 75 ft, and these cars were acquired by Auto-Train Corporation, later going to Amtrak.


Ben Hom


Re: GATC Type 17

Steve and Barb Hile
 

Also Sinclair used a round dot on the dome and had GAT Type 17 tank cars.

Steve Hile

-----Original Message-----
From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf
Of Tim O'Connor
Sent: Tuesday, May 28, 2019 12:40 PM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] GATC Type 17


WAG company tank car. Jerry Stewart thinks this could be ex-SDRX (Sinclair)
because of the proximity to a Sinclair refinery

https://www.ebay.com/itm/123759473545

Tim O'



--
*Tim O'Connor*
*Sterling, Massachusetts*


Re: Reading decals - was Printing White Decals - 'Fonts'

Drew M.
 

My apologies, Don. I mixed up your question with when the RDG introduced speedlettering. As others have pointed out the "America's Largest..." herald was around by your cutoff date.

Drew in Philly

Sent from TypeApp

On May 28, 2019, at 07:42, "Donald B. Valentine via Groups.Io" <yahoo.com@groups.io target=_blank>riverman_vt=yahoo.com@groups.io> wrote:
     Thank you Drew and Bruce. I feel a bit better knowing the herald was around in 1948. It is easier to change car numbers and built 
dates on commonly found cars that it is to change the herald used.

Cordially, Don Valentine


Re: GATC Type 17

Schleigh Mike
 

All three of the WAG tank cars came from Sinclair.  Two were of the 'Type 17' type from General American.  WAG 200 was from Pennsylvania Tank Car Company.

Regards----Mike Schleigh

On Tuesday, May 28, 2019, 1:40:38 PM EDT, Tim O'Connor <timboconnor@...> wrote:



WAG company tank car. Jerry Stewart thinks this could be ex-SDRX (Sinclair)
because of the proximity to a Sinclair refinery


Tim O'



--
*Tim O'Connor*
*Sterling, Massachusetts*




Re: Printing white and black together, was: Results, Super Clean Degreaser to remove lettering

Dave Parker
 

A two-part decal (white over black) is SOP for the NYC herald as offered in commercial sets.  YMMV, but I would rather deal with the registration problem on the model (HO scale) than in a printer that is not designed to self-register (like an ALPS is).  With the right decal paper (Tango Papa!), the combined thickness of the two films is a complete non-issue.  There are single film decals out there that are worse (not naming namer mind you).

As for spoofing the printer into printing black and white at the same time, I am not sure how that would be executed.  I am no expert, but when I am composing artwork on screen, I think am in RGB, i.e., black is 0-0-0, which is then mapped to 0-0-0-100 in CMYK.  And, to take advantage of the Ghost, the white art is also black, i.e.,  the printer thinks is it's printing black, again 0-0-0-100 but the W cartridge is swapped in for B.  So, both colors would be black during composition (that would seem problematic in itself), and one of them would have to be remapped to 100-100-100-0 somehow.  Hmmmm....

I think I will stick with two-part decals, a depth that I am comfortable in.

Dave Parker
Riverside, CA


Re: Reading decals - was Printing White Decals - 'Fonts'

James E Kubanick
 

I have a photo of RDG 70056, a four bay rib side hopper with a reweigh date of 8-49 with the anthracite logo. I cannot see the class designation on this car, though, as this car has paint damage in that spot. It appears to have been built 6-24.

I plan to model this car using the old Hobbyline car as it has the correct number of ribs and rib spacing.and It will not take a great deal of effort to upgrade the car. I have previously done a Lehigh Valley version, which is nearly identical, although the Reading car has Andrews trucks, making it even more interesting.

Jim Kubanick
Morgantown WV.

On Tuesday, May 28, 2019, 7:42:33 AM EDT, Donald B. Valentine via Groups.Io <riverman_vt@...> wrote:


     Thank you Drew and Bruce. I feel a bit better knowing the herald was around in 1948. It is easier to change car numbers and built 
dates on commonly found cars that it is to change the herald used.

Cordially, Don Valentine

16621 - 16640 of 181173