The two Sunshine kits covering these cars are being re-issued by Westerfield Date TBD. Bill Welch

Really very well done modeler who did not ID themselves. Bill Welch

Let us see photos of this Tim please so we can judge which we like. Bill Welch

I have to admit whenever I see a comment like ". . . it's pretty much an exact match to the Red Caboose model if you replace the running boards with open-grid steel. Plano makes an etched metal set fo

Dan Kohlberg offers General American decals for Tangent's 8K welded tank car: http://www.icgdecals.com/ga29.htm I have the car but cannot find the decal I bought. . . Bill Welch

Also Steve "Mr. UTLX" Hile has decal sets. Feeling lazy I ordered the assembled undec. black one. Bill Welch

In one of their monthly email announcements IM said they would no longer be selling parts. Bill Welch

For as long s I can remember I have preferred buying the blister packs with 2-4 small tubes. For the past 5 years or so my preferred brand has been DURO, a Henkel product that comes packaged in fours.

Testors liquid sparingly with a 10/0 brush. After application I blow on the joint. After curing overnight, I come back with dull knife blade and test the joints. Bill Welch

Uh oh, somebody needs to get busy. . . Model on Ya'll Bill Welch

It might Mont, certainly would not hurt to try. Bill Welch

Okay, here is my plan: —Measure the interior width with Digital Caliper —Take the measure to Home Depot and ask them to cut a scrap of wood to that width to fit into the body cavity to prevent the sty

This is what I have done: Cut 0.005" styrene sheet into strips scale 3" wide. This is the base that is glued (carefully too much will distort this thin styrene) and let it cure over night. Next carefu

I have pretty much completed building a model of one of the SP's G50-15 GS gons using the Detail Associates kit. The G50-15 was the initial group built with the flat plate ends with two rib stiffeners

Dave obviously the model is already built and I am not going to disassemble it and start over. It is a compromise I am willing to live with on this model. In the past I have scratch built board x boar

Using a photo of Rutland stock car #1960 to guide me I have detailed and damaged this F&C kit. So that I could damage the upper boards I substituted styrene strip of the same size—hopefully avoiding N

Over the years three models have been done of the CN's 7-panel Howe Truss Boxcars—F&C ()originally Steam Shack I think), Sylvan, and Kaslo Shops. I am interested in trying to understand built dates an

Bob's Photo has a Col. Chet McCoid photo of L&N #25158 in service. I had a modeling article in the L&N's Historical Society magazine 2-3 years ago that is probably still available from them. Speedwitc

Here are my Z-Bars made with 0.005 styrene as part of Wine Locking Mechanism for my MEC GS gon model from F&C, originally a Yankee Clipper kit. Phase One is forming one bend around 2 x 2 strip styrene

"With a bit of trepidation. . ." Bob, glad to see you are not cowed by comments from some who have never shared photos of their modeling thus conveintly avoiding scrutiny. I like your weathering "acci