The pump

I did decals for the late Stan Rydarowicz for a series of dry ice cars now part of Tichy's line. I can make variations for specific cars jerryglow at comcast dot net

Ed provided me the drawing I sent to Chad to do the car. This is the end from that drawing

The box for the Santa Fe car says Bx-63 - the model is lettered Bx-50. Did you modify it or ?

Be sure to reference Bill Welch's Modeling the AAR_ARA Standard Steel Boxcars.pdf It has some MP/I-GN specific details

I will be including that with the boiler lettering sets

The 2009 Cocoa Beach SNT project was a UP S40-10 stockcar rebuilt variously from box and auto boxcars. It included the vertical rib end for those wishing to model the on from auto boxcars

It occurred to me I never mentioned I have decals for the Birchfield boilers. Contact me at jerryglow at comcast dot net

Using the plastic ones, I used thinned Barge cement to glue them to the roofwalk which can then be easily glued to a plastic roof

Don't those laser cut interiors add to the side's thickness? This seems it would destroy some of the illusion we're trying to achieve

You did not include an email address Contact me at jerryglow at comcast dot net

Sunshine made a minikit to convert their 42ft car. It consisted of an extra side to splice the sides longer and new ends. No underbody or decals. My model https://web.archive.org/web/20151002172809/ht

I did artwork for an O-scale importer for those 3 tube cars years ago. I wonder if he ever produced them. Jerry Glow

Back when I was in SoCal and ran a model paint shop, one friend sharpened dowls to use in place of wheelsets when we media blasted trucks.

I can't believe they came out with this garbage stuff which is available (usually better) by others and pass over redoing some of the P2K line. The rebuild is worst than the Atlas (and that's going so

Acc to Sunshine's info they had both the 10'3" and 7'8" ones. Best I can tell the P2K is a 8'5" car numbered for the 7'8" ones and in white lettering.. Martin said that series had yellow lettering. I

Ed Hawkins provided me excellent info on the missing info I referred to. It's operating instructions for the retauner vakve and obviously only goes on the left B-end. It will br included on my set.

I used to use a piece of keystock to flatten wire in a vice (or a good smack)

Actually there is some symbol or logo in the 2nd panel from the right; I just downsized some lettering for what appears below it - it's not going to be legible at a scale half inch lettering.

Tim is correct: I wanted as built lettering The Oddballs set seems to be a mix of old and new but thanks to help my set is complete. See my completed artwork Anyone want one? Good for the ECW kit or A