Making grab irons
Allen is referring to, I believe, the sidebar on p. 89 in Ted Culotta's fourth installment of the Essential Freight Car series in the July 2003 RMC on NP's double-sheathed boxcars. In the same issue on p. 66 Mike Rose also illustrates building straight and drop grabs (although on cars out of scope for STMFC).
This issue is one of RMC's high-water marks for mid-century freight-car modelers, what with the above articles and techniques as well as two product reviews, one of Sylvan's HO Canadian National autobox and the other of Lionel's O PS-5, and a pictorial of a layout of Hamilton ON in 1958 and Keith Kohlmann's description of the American Motors auto loading facility for its plant in Kenosha WI.
Grand Rapids MI
Re: Molded-on Grab Irons and grab iron bending device
Posted by: "Allen Cain" firstname.lastname@example.org allen_cain
Date: Sat Nov 21, 2009 5:29 pm ((PST))
The Mission Model bending jig looks really nice but $90 puts it out of may
range for a specialty tool.
Sometime back one of the magazines ran an article where a piece of sheet
plastic with manufactured scribed slots (siding?) was cut in a triangular
shape with the slots running parallel to the base of the triangle. Then,
you pick the slot that matches the width that you need and lay a piece of
wire in it and simply bend it over the edges of the plastic. Bingo, a grab
iron. The taller the triangle combined with a narrow base gives you a LOT
of slots which vary in length only slightly as you go from one slot to the
I built one of these for a zero cost using scraps from the plastic box and
it works great.
Hopefully my description makes sense.
When I lived in SoCal Terry Wegman engraved a pair of "duckbill" pliers to make drop grabs for P2K gondolas as they do not match any commercially available grabs. You made the U shape the usual way and inserted it into the engraved slot and bent the legs over. Another Dan Smith achieved the same by ACCing a stop on the inside face of one side of his pliers.toggle quoted messageShow quoted text
--- In STMFC@yahoogroups.com, Doug Polinder <mikado3399@...> wrote: