Date
1 - 7 of 7
Replacement parts for grit blaster
|
Raymond Young
Hello all,
I have a problem with my micro-blaster and need to replace the nozzle, the inside tubing and outside tubing. The blasting cabinet was marketed by North Coast engineering 20-25 years ago. Can any of you give me some leads on replacement siphon tubes and nozzle? Regards, Virgil Young, Amarillo, TX |
|
|
|
James F. Brewer <jfbrewer@...>
Virgil,
toggle quoted message
Show quoted text
Try here: http://www.cycloneblasters.com/ I believe this is the source for the North Coast booth; I've ordered replacement parts from them; great service. Jim Brewer Glenwood MD ----- Original Message -----
From: "Raymond Virgil Young" <rayvirg@...> To: STMFC@... Sent: Tuesday, August 3, 2010 7:21:33 PM Subject: [STMFC] Replacement parts for grit blaster Hello all, I have a problem with my micro-blaster and need to replace the nozzle, the inside tubing and outside tubing. The blasting cabinet was marketed by North Coast engineering 20-25 years ago. Can any of you give me some leads on replacement siphon tubes and nozzle? Regards, Virgil Young, Amarillo, TX [Non-text portions of this message have been removed] |
|
|
|
Raymond Young
Jim,
Thanks for the information. I've sent an Email message to them asking for a new pencil gun and associated tubing. Virgil Young ________________________________ From: James F. Brewer <jfbrewer@...> To: STMFC@... Sent: Tue, August 3, 2010 9:42:00 PM Subject: Re: [STMFC] Replacement parts for grit blaster Virgil, Try here: http://www.cycloneblasters.com/ I believe this is the source for the North Coast booth; I've ordered replacement parts from them; great service. Jim Brewer Glenwood MD ----- Original Message ----- From: "Raymond Virgil Young" <rayvirg@...> To: STMFC@... Sent: Tuesday, August 3, 2010 7:21:33 PM Subject: [STMFC] Replacement parts for grit blaster Hello all, I have a problem with my micro-blaster and need to replace the nozzle, the inside tubing and outside tubing. The blasting cabinet was marketed by North Coast engineering 20-25 years ago. Can any of you give me some leads on replacement siphon tubes and nozzle? Regards, Virgil Young, Amarillo, TX [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] |
|
|
|
I think my grit is worn out... I don't recall the size grit I originally
toggle quoted message
Show quoted text
had. What size grit do most people use? Lately I have used a Badger air eraser bottle as my spray "gun". I like how it doesn't clog and runs longer without stopping. Tim O'Connor Virgil, |
|
|
|
Raymond Young
Tim,
I think I'm using about 60 grit. Virgil Young Amarillo, Tx ________________________________ From: Tim O'Connor <timboconnor@...> To: STMFC@... Sent: Wed, August 4, 2010 12:15:28 AM Subject: Re: [STMFC] Replacement parts for grit blaster I think my grit is worn out... I don't recall the size grit I originally had. What size grit do most people use? Lately I have used a Badger air eraser bottle as my spray "gun". I like how it doesn't clog and runs longer without stopping. Tim O'Connor Virgil, |
|
|
|
Tim,
toggle quoted message
Show quoted text
I recently made the switch to baking soda and am pretty happy with it. Its cheaper, especially when you buy the 5 lbs bag at Sams Club, less of a danger if accidentally inhaled, and easier to dispose of. I get rid of mine by spreading it on my acidic lawn, instead of paying someone to "lime" my lawn <G>. Regards Bruce Smith Auburn, AL On Aug 4, 2010, at 12:15 AM, Tim O'Connor wrote:
|
|
|
|
Lee Thwaits <leethwaits@...>
220 grit aluminum oxide.
Lee Thwaits |
|
|