1. RealSTMFC | Main
  2. Topics

Sunshine instructions

Des Norman
 

Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit. It's kit #64.21 for a PRR X26C. Unfortunately there are no instruction sheets included.

Would anyone have a set of instructions which they could scan and email, please? It would be greatly appreciated.

Many thanks,
Des Norman

O Fenton Wells
 

I have kit 64.35 a X-26C do you think they are the same? Let me know and I
can scan and send.
Fenton

On Sun, Mar 20, 2011 at 4:58 PM, Des Norman <desanorman@...> wrote:



Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit. It's kit #64.21
for a PRR X26C. Unfortunately there are no instruction sheets included.

Would anyone have a set of instructions which they could scan and email,
please? It would be greatly appreciated.

Many thanks,
Des Norman



--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...


[Non-text portions of this message have been removed]

Des Norman
 

Hi Fenton,
I've just checked the list of Sunshine kits in the Files section. The ones listed are all later kits.

The label on the kit I have has;
'PRR X-26C steel rebuild, Superior door, straight panel'

Maybe your one is another variant of the X26C, in which case presumably the same instructions would do, so please send when convenient.

Regards,
Des

--- In STMFC@..., O Fenton Wells <srrfan1401@...> wrote:

I have kit 64.35 a X-26C do you think they are the same? Let me know and I can scan and send.
Fenton

On Sun, Mar 20, 2011 at 4:58 PM, Des Norman <desanorman@...> wrote:
Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit. It's kit #64.21 for a PRR X26C. Unfortunately there are no instruction sheets included.

Would anyone have a set of instructions which they could scan and email, please? It would be greatly appreciated.

Many thanks,
Des Norman
--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...

Jim Hayes
 

I'm making some assumptions here as I don't have any of the 3 X26c kits
(64.20-64.22). There are 83 kits in the 64.x series and I think all or most
use the same instructions for "Rebuilt Steel Boxcars" Those instructions are
correct for 64.1 - 64.15. For succeeding kits that include the now generic
Rebuilt Steel Boxcars instructions, the Prototype Data Sheet should contain
an "Additional Modeling Notes" section for your specific kit. So what's
needed is a combination of the generic instructions and the PDS covering the
X26c.

I have a large collection of Sunshine instructions and PDSs but I'm lacking
most of the 64.x series. I have only the instructions & PDS for kits
64.1-64.15. Fenton (or anyone else), if you have PDSs for any other 64.x
kits, I'd really like to have a copy. Instructions too if they are not
"Rebuilt Steel Boxcars".

Thanks,

Jim Hayes
Portland Oregon
www.sunshinekits.com


On Sun, Mar 20, 2011 at 1:58 PM, Des Norman <desanorman@...> wrote:



Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit. It's kit #64.21
for a PRR X26C. Unfortunately there are no instruction sheets included.

Would anyone have a set of instructions which they could scan and email,
please? It would be greatly appreciated.

Many thanks,
Des Norman


[Non-text portions of this message have been removed]

O Fenton Wells
 

Roger that I will try to get them to you today.
Fenton

On Mon, Mar 21, 2011 at 9:05 AM, desanorman <desanorman@...> wrote:



Hi Fenton,
I've just checked the list of Sunshine kits in the Files section. The ones
listed are all later kits.

The label on the kit I have has;
'PRR X-26C steel rebuild, Superior door, straight panel'

Maybe your one is another variant of the X26C, in which case presumably the
same instructions would do, so please send when convenient.

Regards,
Des

--- In STMFC@..., O Fenton Wells <srrfan1401@...> wrote:

I have kit 64.35 a X-26C do you think they are the same? Let me know and
I can scan and send.
Fenton

On Sun, Mar 20, 2011 at 4:58 PM, Des Norman <desanorman@...> wrote:
Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit. It's kit #64.21
for a PRR X26C. Unfortunately there are no instruction sheets included.

Would anyone have a set of instructions which they could scan and
email, please? It would be greatly appreciated.

Many thanks,
Des Norman
--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...



--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...


[Non-text portions of this message have been removed]

Dennis Williams
 

Jim.
I do believe I may have these, go figure. Are they still needed??
Dennis Williams/Owner
www.resinbuilders4u.com

--- On Mon, 3/21/11, Jim Hayes <jimhayes97225@...> wrote:

From: Jim Hayes <jimhayes97225@...>
Subject: Re: [STMFC] Sunshine instructions
To: STMFC@...
Date: Monday, March 21, 2011, 9:37 AM
I'm making some assumptions here as I
don't have any of the 3 X26c kits
(64.20-64.22). There are 83 kits in the 64.x series and I
think all or most
use the same instructions for "Rebuilt Steel Boxcars" Those
instructions are
correct for 64.1 - 64.15. For succeeding kits that include
the now generic
Rebuilt Steel Boxcars instructions, the Prototype Data
Sheet should contain
an "Additional Modeling Notes" section for your specific
kit. So what's
needed is a combination of the generic instructions and the
PDS covering the
X26c.

I have a large collection of Sunshine instructions and PDSs
but I'm lacking
most of the 64.x series. I have only the instructions &
PDS for kits
64.1-64.15. Fenton (or anyone else), if you have PDSs for
any other 64.x
kits, I'd really like to have a copy. Instructions too if
they are not
"Rebuilt Steel Boxcars".

Thanks,

Jim Hayes
Portland Oregon
www.sunshinekits.com


On Sun, Mar 20, 2011 at 1:58 PM, Des Norman <desanorman@...>
wrote:



Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit.
It's kit #64.21
for a PRR X26C. Unfortunately there are no instruction
sheets included.

Would anyone have a set of instructions which they
could scan and email,
please? It would be greatly appreciated.

Many thanks,
Des Norman
 

[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links


    STMFC-fullfeatured@...


O Fenton Wells
 

Des, send me your email so I can email the scans to you.
Fenton

On Mon, Mar 21, 2011 at 9:05 AM, desanorman <desanorman@...> wrote:



Hi Fenton,
I've just checked the list of Sunshine kits in the Files section. The ones
listed are all later kits.

The label on the kit I have has;
'PRR X-26C steel rebuild, Superior door, straight panel'

Maybe your one is another variant of the X26C, in which case presumably the
same instructions would do, so please send when convenient.

Regards,
Des

--- In STMFC@..., O Fenton Wells <srrfan1401@...> wrote:

I have kit 64.35 a X-26C do you think they are the same? Let me know and
I can scan and send.
Fenton

On Sun, Mar 20, 2011 at 4:58 PM, Des Norman <desanorman@...> wrote:
Hello all,
I recently bought 2nd-hand an unstarted Sunshine kit. It's kit #64.21
for a PRR X26C. Unfortunately there are no instruction sheets included.

Would anyone have a set of instructions which they could scan and
email, please? It would be greatly appreciated.

Many thanks,
Des Norman
--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...



--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...


[Non-text portions of this message have been removed]

Des Norman
 

Hi Fenton,
My email address is desanorman@...

Many thanks,
Des

--- In STMFC@..., O Fenton Wells <srrfan1401@...> wrote:

Des, send me your email so I can email the scans to you.
Fenton

O Fenton Wells
 

Roger that I'll try to get it over the pond in a few minutes.

On Mon, Mar 21, 2011 at 3:29 PM, desanorman <desanorman@...> wrote:



Hi Fenton,
My email address is desanorman@...

Many thanks,

Des

--- In STMFC@..., O Fenton Wells <srrfan1401@...> wrote:

Des, send me your email so I can email the scans to you.
Fenton



--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...


[Non-text portions of this message have been removed]

Benjamin Hom
 

Guys,

This is a great example of how this list fosters cooperation, but can you take
working the details off list?  Not everyone cares about the nust snad bolts of
this.


Ben Hom

----- Original Message ----
From: O Fenton Wells <srrfan1401@...>
To: STMFC@...
Sent: Mon, March 21, 2011 3:39:27 PM
Subject: Re: [STMFC] Re: Sunshine instructions

Roger that I'll try to get it over the pond in a few minutes.

On Mon, Mar 21, 2011 at 3:29 PM, desanorman <desanorman@...> wrote:



Hi Fenton,
My email address is desanorman@...

Many thanks,

Des

--- In STMFC@..., O Fenton Wells <srrfan1401@...> wrote:

Des, send me your email so I can email the scans to you.
Fenton
 


--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...


[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

jerryglow2
 

They did it to get you practice spelling "nuts and bolts" Blew it that time <g>

Jerry Glow

--- In STMFC@..., Benjamin Hom <b.hom@...> wrote:

Guys,

This is a great example of how this list fosters cooperation, but can you take
working the details off list?  Not everyone cares about the nust snad bolts of
this.


Ben Hom 



----- Original Message ----
From: O Fenton Wells <srrfan1401@...>
To: STMFC@...
Sent: Mon, March 21, 2011 3:39:27 PM
Subject: Re: [STMFC] Re: Sunshine instructions

Roger that I'll try to get it over the pond in a few minutes.

On Mon, Mar 21, 2011 at 3:29 PM, desanorman <desanorman@...> wrote:



Hi Fenton,
My email address is desanorman@...

Many thanks,

Des

--- In STMFC@..., O Fenton Wells <srrfan1401@> wrote:

Des, send me your email so I can email the scans to you.
Fenton
 


--
Fenton Wells
3047 Creek Run
Sanford NC 27332
919-499-5545
srrfan1401@...


[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

Des Norman
 

Ben and all,
Sorry about that.
Regards,
Des

--- In STMFC@..., Benjamin Hom <b.hom@...> wrote:

Guys,
This is a great example of how this list fosters cooperation, but can you take working the details off list?  Not everyone cares about the nust snad bolts of this.

Dave Nelson
 

Actually, thinking of the example, are these something that should be
available on the site that hosts the Sunshine Price list? It already has
flyers. Seems like instructions could fit right in there too.

Dave Nelson

--- In STMFC@..., Benjamin Hom <b.hom@...> wrote:

Guys,
This is a great example of how this list fosters cooperation, but can you
take working the details off list?  Not everyone cares about the nust snad
bolts of this.

Jim Hayes
 

I talked to Martin and Patricia Lofton about this and they prefer that I not
add instructions & PDFs for Sunshine kits to my site.

Jim Hayes
Portland Oregon
www.sunshinekits.com

On Mon, Mar 21, 2011 at 7:26 PM, Dave Nelson <Lake_Muskoka@...> wrote:



Actually, thinking of the example, are these something that should be
available on the site that hosts the Sunshine Price list? It already has
flyers. Seems like instructions could fit right in there too.

Dave Nelson


--- In STMFC@..., Benjamin Hom <b.hom@...> wrote:

Guys,
This is a great example of how this list fosters cooperation, but can you
take working the details off list? Not everyone cares about the nust snad
bolts of this.


1 - 14 of 14