Responding personally to a post


thecitrusbelt@...
 

This is a problem on all three Yahoo groups I moderate.  It seems to have arrived with the "upgrade" to Neo.

Does anyone have a work-around?


Bob Chaparro

Hemet, CA


Chuck Higdon
 

Below your signature there is a "Posted by:" and then the sender's email
address. That is what I copy and then paste into a new email. I believe it
works. That is what I did to request a copy of Ben's PDF. I will do the
same next and send you an email to confirm.



Take care,
Chuck Higdon- check out my FEC layout at
https://picasaweb.google.com/102920461774912857361







From: STMFC@... [mailto:STMFC@...]
Sent: Sunday, August 24, 2014 12:51 PM
To: STMFC@...
Subject: [STMFC] Re: Responding personally to a post





This is a problem on all three Yahoo groups I moderate. It seems to have
arrived with the "upgrade" to Neo.

Does anyone have a work-around?



Bob Chaparro

Hemet, CA


Tom Vanwormer
 

note below the original message you can "Reply to Sender" in the box or copy the email address of the sender in the "thecitrusbelt@... in the "wrote" line.
Tom VanWormer
Monument CO

thecitrusbelt@... [STMFC] wrote:

 

This is a problem on all three Yahoo groups I moderate.  It seems to have arrived with the "upgrade" to Neo.

Does anyone have a work-around?


Bob Chaparro

Hemet, CA


John Barry
 

I had this trouble on HOEX of getting everyone's response posted to the group.  There is now a setting that the Owner/Moderator has to select regarding replies.  It can be to either the sender or to the group.  I had to change it on my sales group to individual senders.  


I believe that STMFC is set the way most of us want for responding to posts. In this case, my response is going to the whole group as with the reply to group set, Yahoo aliases the group address as the reply to, while still allowing us to see who it came from.  From: "Tom VanWormer robsmom@... [STMFC]"  

To reply to the 
 individual when this happens, I click reply then replace the auto generated "TO" with a copy of the individual's address highlighted and copied from the now expanded thread lines below my draft.

Hope this helps.


John Barry


ATSF North Bay Lines
Golden Gates & Fast Freights


707-490-9696


3450 Palmer Drive, Suite 4224
Cameron Park, CA 95682


From: "Tom VanWormer robsmom@... [STMFC]"
To: STMFC@...
Sent: Sunday, August 24, 2014 10:16 AM
Subject: Re: [STMFC] Re: Responding personally to a post

 
note below the original message you can "Reply to Sender" in the box or copy the email address of the sender in the "thecitrusbelt@... in the "wrote" line.
Tom VanWormer
Monument CO

thecitrusbelt@... [STMFC] wrote:

 
This is a problem on all three Yahoo groups I moderate.  It seems to have arrived with the "upgrade" to Neo.
Does anyone have a work-around?

Bob Chaparro
Hemet, CA



Greg Martin
 

Yeah Look at the bottom of the post and you'll see the senders address and you simply need to reply and replace the "list" address with the senders... problem solved
 
Greg Martin
 
Eventually all things merge into one and a river runs through it.
Norman Maclean
 
In a message dated 8/24/2014 9:51:35 A.M. Pacific Daylight Time, STMFC@... writes:

 

This is a problem on all three Yahoo groups I moderate.  It seems to have arrived with the "upgrade" to Neo.

Does anyone have a work-around?


Bob Chaparro

Hemet, CA


rob.mclear3@...
 

Bob
I seem to able to reply off list but I don't get any individual emails and troll the list on the webpage only.  When you hit reply the Subject line will come up.   Then hit the double arrow to the left of it, a "To" line will come up and there is a small arrow in it on the right hit that and a number of addresses come up I then just change the address to the one without the group name in it, there are usually four and the individual name address is usually, but not always, the second address.   That should get you to the individual and not the group.

Rob McLear
Australia.


Andy Harman
 

At 05:37 PM 8/24/2014 -0400, you wrote:
Yeah Look at the bottom of the post and you'll see the senders address and you simply need to reply and replace the "list" address with the senders... problem solved
If you're using a real mail program. If you're using the web interface... dunno. I hate the web IF and haven't used it for years.

Andy