"The Standard Car Company" parts


BillD53A@...
 

<A HREF="http://home.t-online.de/home/all-american-trains/">All American
Trains</A> Here is a link to the site


MDelvec952
 

In a message dated 3/18/01 8:39:48 AM Eastern Standard Time, bwelch@uucf.org
writes:

Anyway, I sent Mr. Vaentine an inquiry about how to get a couple of sets,
along with a SASE but have heard nothing.


Bill Welch <bwelch@...>
 

Don Valentine of "New England Rail Service" is offering at least one freight parts set under "The Standard Car Company" label. The set is to modify an Accurail single sheathed wood end/wood door car into a door and a half Grand Trunk car. An article doing this was in RMJ very well done by Richard using resin molded parts several years ago..

This set is very well done with small parts like the door guides and the rivited triangular reinforcing plates that were attached next to the door opening on each side of the door. This is the parts set that Stafford made reference to in his series in the recent RMJ. It is #1000.

Anyway, I sent Mr. Vaentine an inquiry about how to get a couple of sets, along with a SASE but have heard nothing. It has been a couple of months now. Does anyone know of a hobby shop that carries his line?

Also I understand there is a German Company with a web site that has a lot of info about what is coming from Life Like. I tried "all_american_trains" on my search engine, as directed by my source but came up with nothing. Can anyone advise?


Bill 'Welch <bwelch@uucf.org>
Associate Minister, Unitarian Universalist Congregation of Fairfax
P.O. Box 130 Oakton VA 22124 www.uucf.org
Telephone 703 281-4230 Fax 703 281-5399


Kathe Robin <kathe@...>
 

Unfortunately, Don Valentine (NERS/Standard Car Company) was in a severe
accident about a month ago while enroute to the annual Train Show in
Mass. (While he was stopped at a light, someone plowed into the back
of his Volvo at something like 40 MPH and put both he and his wife in
the hospital and totaled the car.) I talked to Don via email recently
and they are both recovering, but its slow going. He is however
shipping product - especially those doors, since I just ordered 25 sets
and sent him a check w/order.

I would suggest trying to reach him via email of smail again.

Max
-----------------------------------------------------
email: m_robin@cheatriver.com

smail: Max S. Robin, P.E.
Cheat River Engineering Inc.
23 Richwood Place / P. O. Box 289
Denville, NJ 07834 - 0289

voice: 973-627-5895 / 973-627-5460 / 973-586-4310
cell.: 201-404-4075
-----------------------------------------------------


Jeff Aley - GCD PE <jaley@...>
 

On Mar 18, 8:40am, Bill Welch wrote:
Subject: [STMFC] "The Standard Car Company" parts
Anyway, I sent Mr. Vaentine an inquiry about how to get a couple of
sets, along with a SASE but have heard nothing. It has been a couple of
months now. Does anyone know of a hobby shop that carries his line?


Bill,

Don is a member of the Passenger Car List, and (lately) has been
posting regularly. His email address is newrail@sover.net .

Let us know what you find out.

Regards,

-Jeff

--
Jeff Aley, Development Engineer jaley@pcocd2.intel.com
Graphics Components Division
Intel Corporation, Folsom, CA
(916) 356-3533